Posts Tagged ‘Sprinkler System Contractor Oklahoma City’


CMG Provides Expert Sprinkler Repair for:  Sprinkler Valves, Sprinkler Heads, Sprinkler Controllers, and the most common problem, Sprinkler Pipes or Sprinkler Leaks.

Sprinkler Repair Service is provided for: Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Blanchard, New Castle, and all surrounding areas.

Sprinkler Repair is also very popular this time of year.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.  CMG Sprinkler Repair Specialist have been busy.  We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Now is a great time to consider a new Lawn Sprinkler Irrigation System by CMG.  CMG Sprinklers and Drains installs top of the line Sprinkler Systems that are dependable and last for decades.  Yes, I said decades!  We warranty our sprinklers for two years,  but we build them to last much longer.  We started small in Norman in 1993.  The sprinkler systems installed that year, to my knowledge are functional and going strong.

From time to time CMG Service Experts must work on a sprinkler system that we installed.  Usually it is for reasons beyond our control like, “lightning burning up a sprinkler controller” or,  “a customer running over a sprinkler head with their car.”

CMG designed sprinkler systems are fully automatic and self-draining.  When the sprinklers are not running, the system automatically drains the sprinkler pipes under ground.  If it gets cold there is no water in the sprinkler pipes to freeze.

Installing a Compression "T" to connect a Sprinkler System to the Water Line

Installing a Compression “T” to connect a Sprinkler System to the Water Line

CMG is gearing up for a busy year.  This winter has been unusually warm.  As a result, we are getting more calls earlier in the year.

Services provided by CMG carry a two-year warranty for parts and labor.  This includes Sprinkler System Installation,  Sprinkler Repair, and all Drainage Systems including French Drains, Surface Drains, and Channel Drains.

Now is a great time to consider a new Lawn Sprinkler Irrigation System by CMG. CMG Sprinklers and Drains installs top of the line Sprinkler Systems that are dependable and last for decades.  Yes, I said decades!  We warranty our sprinklers for two years,  but we build them to last much longer.  We started small in Norman in 1993.  The sprinkler systems installed that year, to my knowledge are functional and going strong.

From time to time CMG Service Experts must work on a sprinkler system that we installed.  Usually it is for reasons beyond our control like, “lightning strikes  burning up a sprinkler controller” or,  “a customer running over a sprinkler head with their car.”

CMG designed sprinkler systems are fully automatic and self-draining.  When the sprinklers are not running, the system automatically drains the sprinkler pipes under ground.  If it gets cold there is no water in the sprinkler pipes to freeze.

Sprinkler Adjustment by CMG Sprinkler and Drain — Adjustment of  a Sprinkler System is a necessary part of owning and operating an Irrigation SystemSprinkler Heads get run over by cars or get knocked out of adjustment by weed-eaters. Sprinkler Heads need to be moved or adjusted for many reasons.  If your Sprinklers are not putting water where it needs to go, give CMG a call.  405-226-0629

Wow, we have a new twist on sprinkler repair.  Broken sprinkler pipes occur for all kinds of reasons.  Sprinkler Pipes break because:  1.  They freeze (usually due to poor installation)  2.  Cars or trucks drive up in yards and break them.  3.  They blow apart under pressure (usually because primer was not used when the pipes were glued together).

This year we have had a lot of calls to fix leaking or broken sprinkler pipes due to Earth Quake Damage.  I would expect that in California, but Oklahoma?  Since 1993 CMG has fixed sprinkler systems for all kinds of reasons.  Earthquake damage is something new.


CMG Sprinklers and Drains — In business since 1993.  Servicing all of central Oklahoma, Including: Oklahoma City, Norman, Moore, Edmond, Midwest City, Del City, Blanchard, Newcastle, Mustang, and Yukon.  We Install Drainage Systems that utilize French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.  CMG also provides the best Sprinkler System Installation and Sprinkler Repair.

Our most recent Sprinkler System Installation was in East Oklahoma City.  It was a Five Zone Sprinkler System.  The Sprinkler Heads were Rain Bird 5004s with Rainbird 4inch Popup Sprinkler Heads in the flower beds.  The Controller was a Hydro-Rain Sprinkler Controller with a Rain-Freeze Sensor attached.  The Sprinkler System Installation took two days.

CMG Sprinkler and Drain   — CMG has installed Lawn Sprinklers in Edmond and all of Central Oklahoma since 1993.  Typically we install Rain Bird Lawn Irrigation Systems but will install all other major brands at customers request.

Recently we installed a seven zone Rain Bird Sprinkler System near Penn and 172 nd  st.   We installed Rain Bird 5004 model Sprinkler Heads along with a Rain- Freeze Sensor.

The Lawn Irrigation System took two days to install.    More fun in the sun on a hot day.

If you are tired of dragging hoses around trying to keep your yard alive, consider a Lawn Sprinkler System Designed by CMG.

We service all of Central Oklahoma including: Edmond, Norman, Moore, Yukon, Mustang, Newcastle, Del City, Midwest City, Oklahoma City, Purcell, and Blanchard.

We also Specialize in French Drains and Surface Drains and all types of Drainage Systems.  If you need a channel drain installed across a sidewalk or a metal grate put in a driveway, Give us a call.

405-226-0629

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler Systems Repairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or French Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Please leave a comment at the bottom if you like.

Blane Callen

 


CMG Sprinklers and Drains started 2015 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not too small.  CMG can install Sprinkler Systems with Pumps as small as 3/4 horse.   We also install Sprinkler Systems connected to any standard residential water meter up to two inch.

Sprinkler Valve installation in Edmond

Sprinkler Valve installation in Edmond

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Back-Flow Valve installation in Norman

Back-Flow Valve installation in Norman

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.  If it was installed by CMG, then you call us.  A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

CMG also installs Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.

405-226-0629                        cmgsprinklers@hotmail.com   or cmgsprinklers@gmail.com


Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 


Sprinkler System Contractor in Oklahoma City —  CMG Sprinklers and Drains started 2014 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not too small.  CMG can install Sprinkler Systems with Pumps as small as 3/4 horse.   We also install Sprinkler Systems connected to any standard residential water meter up to two inch.

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.  If it was installed by CMG, then you call us.  A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

Angie’s List rates us A+ and now has awarded CMG Sprinklers and Drains for our exceptional customer service in french drains, surface drains, sprinkler installations and repair!  Our french drains and sprinkler systems come with a TWO YEAR WARRANTY on all parts and labor.  In business now for over 20 years, CMG is alocalcompany that takes great pride in delivering the best in customer service and quality work you can trust.  CMG services what we install and we are always a phone call away for all your drainage and irrigation needs 405-226-0629.  We service all of Central Oklahoma including Edmond, Oklahoma City, Moore, Norman, Midwest City, Del City, Purcell, Blanchard, Newcastle, Mustang, Yukon

Drainage System Installation in Norman
Drainage System Installation in Norman

CMG also installs Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.

405-226-0629                        cmgsprinklers@hotmail.com