Posts Tagged ‘sprinkler repair’


Spring is here.  Now is a good time to plan for a new Lawn Sprinkler System. CMG has installed top quality Lawn Sprinkler Systems since 1993.  Our Sprinkler Systemsare automatic and self draining requiring little to no maintenance.  Sprinkler System Installation requires experience and attention to detail. CMGcan install any sprinkler brand available, but we prefer Rain Bird or Hunter.

Sprinkler Repair usually occurs in the Spring. CMGcan help with: Broken Sprinkler Heads, Leaking or stuck sprinkler valves, broken Sprinkler Pipes, Sprinkler Controller/Clock problems,  plus any other sprinkler system problem you might have.

 

Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 


For twenty one years, CMG has provided Sprinkler Repair for Central Oklahoma.

 

Lawn Irrigation Systems require maintenance from time to time.  All types of Sprinkler Repair become necessary.    Sprinkler heads break for several reasons.  Dogs chew up Sprinkler Heads.  Tree roots twist and break Sprinkler heads.  Cars run over and break Sprinkler Heads.  Weed Eaters cut the tops off Sprinkler Heads.  If you have a Sprinkler Head that is not performing perfectly, CMG can help.

Sprinkler Valves can have trouble too.  The Sprinkler Valve Wiring becomes disconnected or shorts out.  Tree Roots can stretch or break the Sprinkler WiresSprinkler Valves can start leaking over time. CMG can solve Sprinkler Valve problems of all types.

The Sprinkler Valves that you see above are a mess.  They were leaking and weren’t working correctly.  We replaced the above Sprinkler Valves with the ones you see below.

Sprinkler System Controllers can cause big headaches for home owners as well.  CMG can install a new sprinkler controller quickly and easily.

 

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

 

CMG recently repaired a Sprinkler System in Blanchard.  We replaced many Sprinkler Heads and fixed broken Sprinkler Pipes.  It took only a few hours to do the work. 

Quality Sprinkler Repair is all about experience.  For twenty years, CMG has:

Replaced Damaged Sprinkler Valves.

Replaced or Adjusted Broken  Sprinkler Heads

Replaced or Reprogrammed Sprinkler System Controllers

Explained Sprinkler Controller Features and Settings

Fixed Broken Sprinkler Pipes

Found and Repaired Broken Sprinkler Wire

Replaced or Adjusted Broken Back Flow Valves

Almost all Sprinkler Repair falls into one of the above categories.

CMG Services all of Central Oklahoma including: Oklahoma City, Norman, Moore, Edmond, Del City, Tuttle, Blanchard, Newcastle, Purcell, Midwest City, Yukon, Mustang and all surrounding areas.

This concludes ,” CMG – 20 Years of Sprinkler System Repair.”

CMG Sprinklers and Drains 405-226-0629


CMG Sprinklers and Drains — In business since 1993.  Servicing all of central Oklahoma, Including: Oklahoma City, Norman, Moore, Edmond, Midwest City, Del City, Blanchard, Newcastle, Mustang, and Yukon.  We Install Drainage Systems that utilize French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.  CMG also provides the best Sprinkler System Installation and Sprinkler Repair.

Our most recent Sprinkler System Installation was in East Oklahoma City.  It was a Five Zone Sprinkler System.  The Sprinkler Heads were Rain Bird 5004s with Rainbird 4inch Popup Sprinkler Heads in the flower beds.  The Controller was a Hydro-Rain Sprinkler Controller with a Rain-Freeze Sensor attached.  The Sprinkler System Installation took two days.

CMG Sprinkler and Drain   — CMG has installed Lawn Sprinklers in Edmond and all of Central Oklahoma since 1993.  Typically we install Rain Bird Lawn Irrigation Systems but will install all other major brands at customers request.

Recently we installed a seven zone Rain Bird Sprinkler System near Penn and 172 nd  st.   We installed Rain Bird 5004 model Sprinkler Heads along with a Rain- Freeze Sensor.

The Lawn Irrigation System took two days to install.    More fun in the sun on a hot day.

If you are tired of dragging hoses around trying to keep your yard alive, consider a Lawn Sprinkler System Designed by CMG.

We service all of Central Oklahoma including: Edmond, Norman, Moore, Yukon, Mustang, Newcastle, Del City, Midwest City, Oklahoma City, Purcell, and Blanchard.

We also Specialize in French Drains and Surface Drains and all types of Drainage Systems.  If you need a channel drain installed across a sidewalk or a metal grate put in a driveway, Give us a call.

405-226-0629

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler Systems Repairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or French Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Please leave a comment at the bottom if you like.

Blane Callen

 


Winter is a time when a lot can go wrong with a Sprinkler System.  Sprinkler Pipes can freeze and break.  Sprinkler heads can crack or bust.  Above Ground Back-Flow Valves can crack or leak during some some of the warmest winters.  CMG can fix all the above Sprinkler System Problems and much more.  If you are having trouble with your Sprinkler Controller, or if you have a Sprinkler Head shooting out in the street, give CMG a call.

If you just have a question concerning your existing sprinkler system or are considering a new one, we are happy to share time and information with you!

CMG Sprinkler and Drain Provides Expert Sprinkler System Repair for all of Central Oklahoma.  Lawn Irrigation  &Sprinkler Repairs for a large part of Oklahoma.

CMG has Installed New:   Sprinkler Valves in Edmond

Rain/Freeze Sensors in Oklahoma City

Sprinkler Controllers in Yukon

Sprinkler Heads in Norman

Sprinkler Nozzles in Moore

ALONG THE WAY WE HAVE ALSO:

Fixed broken Sprinkler Pipes in Mustang

Traced and Replaced bad Sprinkler Wire in Purcell

Replaced Broken Sprinkler Heads in Blanchard

Adjusted Sprinkler Heads spraying in the wrong place in Oklahoma City

Of course we have made thousands of different Sprinkler Repairs in different Cities locally.

CMG also installs Sprinkler Systems.

CMG Sprinklers and Drains —

Lawn Irrigation Systems installed by CMG are fully automatic.  Sprinkler System Controller in the garage or outside on an exterior wall.  The Sprinkler Controller need only be installed be plugged into a 110 electrical outlet.

Our Sprinkler Systems are Self-Draining.   The Sprinkler Pipes Drain underground when the Irrigation System is turned off.   Nothing needs to be done to prepare your Irrigation System for winter except turn it off.  There is no water left in the Sprinkler Pipes to Freeze.

CMG Sprinklers and Drains — Servicing Central Oklahoma including:  Oklahoma City, Moore, EdmondNorman, Midwest CityDel City, Mustang, YukonBlanchardNewcastle, and Purcell.

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler Systems Repairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or  French Drain Installation.  I prefer that the customer pay me when the job.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

 


Sprinkler Controller Trouble Shooting

Having Installed Several Thousand Sprinkler Systems over the past several years, here are the most common mistakes made by homeowners who are not comfortable with their Sprinkler Controller.

Most Sprinkler Controllers have a knob or a digital touch screen.  Either way, the basic functions are the same.

1.  Sometimes some brands of Sprinkler Controllers won’t work because the ” Time and Date,” have not been set correctly.  If you select time/date and the screen is blank with no time or date then you have a problem.

*******************************************************************************************************************************

2.  The most common reason that a Sprinkler Controller won’t work is because the breaker has been tripped for the electrical plug that the controller is plugged into.  People assume that because the LED screen on the controller has power that the controller is receiving power.  THIS IS NOT THE CASE!!!!!!!!!!!!!!!!  ALL CONTROLLERS HAVE BACKUP BATTERIES IN THEM TO MAINTAIN THE CONTROLLERS PROGRAMMING IF YOUR ELECTRICITY GOES OFF.  THE BREAKER CAN BE TRIPPED TO THE ELECTRICAL OUTLET AND THE DIGITAL DISPLAY WILL STILL RUN OFF THE BATTERY MAKING IT LOOK LIKE IT HAS POWER WHEN IT DOES NOT.

TEST YOUR OUTLET BY CHECKING YOUR BREAKERS OR PLUGGING SOMETHING INTO THE SOCKET SUCH AS A LIGHT OR A POWER TOOL.

********************************************************************************************************************************

Another very common mistake is that people confuse “Start Times,” with “Run Times” on the controller.

A Run Time is how long you program each Sprinkler Zone to run.

(Zone 1  5 minutes, Zone 2 8 minutes, Zone 3 25 minutes and so on.)  You program how long you want each Sprinkler Zone to run.

A Start Time is a time that you set on the controller to start zone one running.  All other zones automatically follow zone one in order lowest to highest.  Zone 2 knows to always follow zone 1 when it is done.  Zone 3 knows to follow Zone 2 and so on.  Let me repeat this.  Start Times are only for zone 1.  Again, a “Start Time,” is a time that you would like your Sprinkler System to come and run through all the zones.

Sprinkler Controllers have the ability to run more than one start time.  This is to allow your entire Sprinkler System to run more than once in a 24 hour period.  You can have a Start Time of 1 PM.  Zone 1 comes on and runs until its programmed time elapses.  Zone 2 automatically comes on next and runs.  Then zone 3 and so on.  You might have a 2nd Start Time several hours later to start and run your entire system again.  (2nd start time at 8 PM)  The Sprinkler System has had plenty of time to run through all the zones when it started at 1 PM.  At 8 PM the controller turns zone 1 on again and all the zones run their programmed amount of time.  THE MISTAKE PEOPLE MAKE IS THINKING THAT YOU MUST PROGRAM A START TIME FOR EACH ZONE. ( YOU CAN NOT PROGRAM A START TIME FOR ZONE 2,3,4 etc.)  This is also apparent by the fact that most Sprinkler Controllers have a limit of 4 start times but can run more zones than 4.  Most Sprinkler Controllers can run 10 zones or more.

What causes a big problem is a when person programs a Start Time at 1Pm.  Thinking incorrectly that they need to program a Start Time for zone 2.  They enter a second Start Time for 1:15pm, and a third start time for zone 3 at 1:30 PM.  So here is what happens.  Say each zone is programmed to run for 10 minutes each.(Run Time)  Zone 1 comes on and runs at 1 PM.  At 1:10 PM Zone 1 stops and zone 2 comes on.  At 1:15 PM the second start time kicks in and tries to turn on zone 1 again while zone 2 has only been running for five minutes and the other subsequent zones have not run at all.  This is called an “Overlapping Start Time.”  With an Overlapping Start Time, Different brands of controllers do different things.  They are all bad regardless.  Some will run zone one over and over and over causing a flood.  Others will not run at all.

Most people only use or need one Start Time.

********************************************************************************************************************************

The “Water Budget Feature,” found on most controllers can cause problems with your Sprinkler Run Times.  Water Budget is a quick way to quickly change all your Run Times for all your zones at once.  Example  —  Out of the box, your new Sprinkler Controller will be set to 100%.  If you program zone 1 to run 10 minutes and zone 2 to run 15 minutes then if your water budget is 100% then that is exactly what they will run.  If you change your water budget from 100% to 200% now zone 1 will run 20 minutes and zone 2 will run 30 minutes and any other zone’s run time will run double of what it was programmed at 100%.  This is a great feature until you accidently change your water budget to 900% and don’t realize it.  (or 5%)

IF YOUR RUN TIMES ARE RUNNING MORE OR LESS THAN WHAT YOU PROGRAMMED THEM FOR THEN CHECK THE WATER BUDGET.

********************************************************************************************************************************

Some of the older digital Sprinkler Controllers have an “Enter” button.  Any programming you do must be followed by hitting the Enter Button.  If you don’t hit it then programming that you think you keyed in is lost.  This is why the newer controllers don’t have an Enter Button.

 


Sprinkler Installation —  Typically Sprinkler Systems have two types of Sprinkler Heads.  You have Rotor Sprinkler Heads and Pop – Up Sprinkler Heads.

These two types of Sprinkler Heads should not be in the same Sprinkler Zone Together.  The reason is that they water at different rates.  The Pop-Up Sprinkler Head is a Continuous Spray Head.  It does not move or rotate.  It covers a small area and puts a lot of water down fast.  The Rotor Sprinkler Heads cover a much larger area and spray back and forth from left to right.  They take a greater amount of time to completely water their designed area.  If Pop-Ups and Rotor Sprinkler Heads are put in the same zone together and run at the same time, by the time the Rotor Sprinkler Heads are finished,  the area covered by the Pop-Up Sprinkler Heads will be Flooded.  This can kill whatever the Pop-Up Sprinkler Head is intended to water.

 

Many times ” Fly – By – Night Sprinkler Companies”  or, ” DIY Home owners who don’t know any better,” Put Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the same zone.

 

IT IS A BIG MISTAKE!

 

CMG Sprinklers and Drains Installs Sprinkler Systems, Drainage Systems ( French Drains, Surface Drains), and Provides Expert Sprinkler Repair.

 

Check out our Photos of French Drains,  Photos of Sprinkler Systems,  Photos of Sprinkler Repair, and Photos of Drainage Systems at out PhotoLibrary.

 

Customer Service Award Winner on Angie’s List

 


Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 


CMG Sprinklers and Drains — We have provided top quality Lawn Sprinkler Repair for 21 Years for all of Central Oklahoma.

 

If you have a Sprinkler Pipe Leaking , or a Sprinkler Zone not working correctly, give us a call.   If your Sprinkler Controller is on the fritz, or if you just have a broken Sprinkler Head get in contact with us.

 

If you have a Sprinkler System Question,  We will respond ASAP!     Email     cmgsprinklers@gmail.com

 

 

 


French Drain in Oklahoma CityFrench Drain in Oklahoma City

 

Too much of anything is never good, especially water.  Standing water can cause damage to sidewalks, driveways, and foundations.  Water can also seep into floor vents and under homes.  During a hard rain water can even run inside homes and business when Drainage is poor. If water is causing damage to your home or business, CMG can help.  We provide free estimates up to 100 miles from Oklahoma City.

Installing French Drain along foundation of home in Norman

Installing French Drain along foundation of home in Norman

For 21 years, CMG has solved Drainage Problems for people in Central Oklahoma.  Experience is key in diagnosing Drainage Problems.  Some Drainage Problems are Simple and straight forward others are complex and difficult.  CMG utilizes a wide variety of Drains and Drain Pipes when designing a Drainage System.  A Simple Drainage System may use one type of Drain running through a Drain Pipe to an Exit Point.  A Complex Drainage System may use several types of Drains and Drain Pipes running to many exit points.  CMG Utilizes:  French Drains, Surface Drains, Channel Drains, Trench Drains and Sump Pumps.  The Drain Pipe we use may be  ADS, PVC, or Sewer and Drain Pipe.  Which Drain and Pipe used depends on the particular Drainage Problem.

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Angie’s List rates us A+ and now has awarded CMG Sprinklers and Drains for our exceptional customer service in french drains, surface drains, sprinkler installations and repair!  Our french drains and sprinkler systems come with a TWO YEAR WARRANTY on all parts and labor.  In business now for over 20 years, CMG is alocalcompany that takes great pride in delivering the best in customer service and quality work you can trust.  CMG services what we install and we are always a phone call away for all your drainage and irrigation needs 405-226-0629.  We service all of Central Oklahoma including Edmond, Oklahoma City, Moore, Norman, Midwest City, Del City, Purcell, Blanchard, Newcastle, Mustang, Yukon

Drainage System Installation in Norman
Drainage System Installation in Norman

A Drainage System using a 4 inch French Drain, connected to a 12 inch basin with a grate, which is also connected to the Gutter Down-Spouts and running to two separate exit points is an example of a moderately complex Drainage System.

Free Estimates within 100 miles of Oklahoma City

CMG has installed Drainage Systems all across Central Oklahoma including,  Oklahoma City, Edmond, Norman, Moore, Purcell, Newcastle, Tuttle, Yukon, Mid West City, Mustang, Del City, and Purcell, and all surrounding areas.

CMG also installs New Lawn Sprinkler Systems and provides expert Sprinkler Repair.

Our Customers are Home Owners,  Business Owners, and Builders.  CMG Installs New Lawn Sprinkler System using Rain Bird Sprinkler System Parts.   Typically the Sprinkler System Controller is installed in the garage or on an outside wall.  Our Sprinkler Systems are FULLY AUTOMATIC AND SELF DRAINING NO WINTERIZATION IS NEEDED FOR OUR SPRINKLER SYSTEMS. (nothing special needs to done to prepare the sprinkler system for winter)  THE SPRINKLER SYSTEM IS TURNED TO THE ” OFF POSITION”, THE SPRINKLER PIPES THEN DRAIN AUTOMATICALLY.


French Drain in Oklahoma CityFrench Drain in Oklahoma City

 

 

Installing Curb Outlet for French Drain in Norman

Installing Curb Outlet for French Drain in Norman

Back-Flow Valve

(Just a few things we have done recently)  Installed: A 12 inch Surface Drain next to a sidewalk, A Sprinkler System for an apartment complex, A Channel Drain across a driveway, A French Drain along a foundation, A Sprinkler Head Makeover installing all new Sprinkler Heads, A Sprinkler Back-Flow Valve Replacement.

Surface Drain Installation

CMG Provides:

Sprinklers —————

Sprinkler System Installation  — Rain Bird, Hunter

Sprinkler System Repair — Sprinkler HeadsSprinkler ValvesSprinkler ControllerRain/Freeze Sensor

Channel Drain Installation in Sidewalk

Drainage Systems ————–

French Drain Installation — 3 inch, 4 inch, and 6 inch French Drains

Surface Drain Installation — 12 inch, 9 inch, 6 inch, Channel Drain 

Angie’s List rates us A+ and now has awarded CMG Sprinklers and Drains for our exceptional customer service in french drains, surface drains, sprinkler installations and repair!  Our french drains and sprinkler systems come with a TWO YEAR WARRANTY on all parts and labor.  In business now for over 20 years, CMG is alocalcompany that takes great pride in delivering the best in customer service and quality work you can trust.  CMG services what we install and we are always a phone call away for all your drainage and irrigation needs 405-226-0629.  We service all of Central Oklahoma including Edmond, Oklahoma City, Moore, Norman, Midwest City, Del City, Purcell, Blanchard, Newcastle, Mustang, Yukon

Drainage System Installation in Norman
Drainage System Installation in Norman