Posts Tagged ‘Oklahoma City French Drain Installation’


A NEW FRENCH DRAIN IN OKLAHOMA CITY

Recently we installed a large Drainage System in OKC.  It was a 4 inch System using 4 inch ADS French Drain Pipe with Soc and 4 inch ADS Solid Drain Pipe.  The “Intake” of the Drainage System had two parts.  Water from the gutters on the house was fed into the Drainage System.  There were 7 gutter downspouts around the entire house that were connected straight into the Drainage System with Solid Drain Pipe and a Gutter connection.

French Drain Installation In Yukon

Oklahoma Drainage and Sprinkler Repair : Servicing all of Central and Western Oklahoma since 1993.

Standing Water on Your Driveway?  A Surface Drain set in concrete may be what you need. Or maybe you need a French Drain Running alongside your driveway instead.  Handling water problems is what we are good at.  If you need help, Oklahoma Drainage can provide the best solution for your unwanted water problems.

standing water

A good place for a French Drain

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

 Oklahoma Drainage and Sprinkler Repair

Hey Oklahoma, We are expanding to service all of Western Oklahoma as well as Central Oklahoma.  If you live in Elk City, and need a French Drain, we can help.  If water is standing on your driveway in Clinton, Give us a call.  Duncan, Lawton, and Altus are all new areas of service for us.

Since 1993 Oklahoma Drainage and Sprinkler Repair has solved all types of standing water and drainage issues.  We install Drainage Systems that utilize French Drains, Surface, Drains, Channel Drains, and Sump Pumps depending on the customers needs.

If you have water in the wrong place , we can help!

We also have Decades of experience repairing all types of Lawn Sprinkler Problems.  Fixing broken sprinkler heads, sprinkler valve problems and controller trouble just to name a few things.

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

river rock french drain

A French Drain Can Handle Standing Water

A French Drain can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water in a large area in your yard?  Typically this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

gutter connection to drain

Gutter Connection to French Drain

 

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

 

If you have water standing in your flowerbed we can install a French Drain For you.  If water is standing on your driveway or sidewalk a Surface Drain or Channel Drain set in concrete might be what you need.  If water is standing in your basement a Sump Pump installation is a good idea.

Drain Pipe for French Drain running under sidewalk

Drain Pipe for French Drain running under sidewalk

We Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   Our customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.

Oklahoma Drainage and Sprinkler Repair installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

Oklahoma Drainage and Sprinkler Repair  installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

FRENCH DRAIN IN EDMOND OKLAHOMA

Recently Oklahoma Drainage and Sprinkler Repair installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

French Drain trench sidewalk

French Drain Trench under sidewalk and through curb

French Drain Installation, Drainage Systems, Surface Drain, Sump pumps, – Oklahoma Drainage and Sprinkler Repair

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage and Sprinkler Repair has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2000 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is help full in seeing underlying problems and secondary issues that may be hard to see at first for the ” Untrained Eye.”  This allows us to get things right the first time.  In this business EXPERIENCE TRULY COUNTS!

Hiring your brother in law to put in your Drainage System or French Drain is as bad as hiring a Lawn mowing company that does landscaping and drains too?  Water can cause a huge amount of damage.  How important is your money and your home?

Blane Callen, 405 203 9419

problem drainage

Is this your yard?

Drainage problem

This is a great place for a French Drain

 

Curb Outlet for French Drain in Edmond

Curb Outlet for French Drain in Edmond

Running French Drain Pipe Under Sidewalk

Running French Drain Pipe Under Sidewalk

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”
The Gentleman gave us a call to set up an appointment.  We arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

 

Installing a Curb Outlet For a French Drain in Edmond

Installing a Curb Outlet For a French Drain in Edmond

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

Edmond Oklahoma has been the location for many French Drain Installations for us in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water


 The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

 Next a French Drain Liner  needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  Oklahoma Drainage  then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Running Drain Pipe to the Curb From French Drain in Back Yard

Running Drain Pipe to the Curb From French Drain in Back Yard

 

 

 

The French Drain we installed ran across the back yard in two places, then it connected to solid ADS Drain Pipe and Ran to the street where a Curb Outlet was installed.

new curb outlet

Curb outlet for French Drain.

Installing a curb outlet takes experience and skill.  We cut the curb with a concrete saw.  Water is used with the saw to make better cuts and to keep the concrete dust to a minimum.  The cut in the curb will be at least two inches wider than the curb outlet that will be set in concrete.  This ensures strength and longevity.  When installing the cement we use cement with Acrylic to further ensure the strength of the outlet.  It takes a while for the concrete to cure.  The new concrete will be darker than the surrounding curb for a while but eventually it will match up.

solid pipe installation

Solid Drain pipe running to the street

We cut the sod out by hand when installing Solid Drain pipe.  The sod is set to the side while the 4 inch pipe is installed.  Then some of the dirt is placed back on top of the drain pipe and the sod is placed back in its original position.  Some of the dirt is left over that is displaced by the new drain pipe.  That dirt is hauled away. 

Recently Oklahoma Drainage and Sprinkler Repair Installed a French Drain as part of a Drainage System in Mid West City Oklahoma.

Our customer had a back porch Sun Room.  Every time he had a hard rain, Water would run in one door and out the other.  An indoor creek across his Sun Room.

We installed a French Drain in front of the South Door.  It was 26 feet long and ran from a gutter downspout which it was connected to,  in front of the South Door and along the house covering the entire “Low” Area.  Then we connected 4 inch ADS Solid Drain pipe to the French Drain and ran down hill around the corner of the house to the street.

pipe to street

French Drain pipe running to street

Once the 4 inch solid drain pipe was connected to the French Drain and the two gutter down spouts, a pop-up emitter was installed to release the water at the street.

The next step was to cover the drain pipe with dirt and put the sod back in place on top of the pipe.   There was about 8 wheelbarrows of dirt left over that was displaced by the drain pipe and the French Drain.  The extra dirt was scooped up and hauled away.

While installing the drainage system, it was necessary to move two sprinkler heads that were in the way of the drain pipe installation.  This was no problem.  Installing drainage systems and French drains for folks who have a sprinkler system is very common.  Moving Sprinkler heads or pipes sometimes is necessary.  We always leave the sprinkler system in complete working order and we discuss any changes in the sprinkler system with the customer before we do it to make sure that everyone is on the same page.  In most cases the customer cant tell that we made any changes to the sprinkler system at all.

 

connecting gutter to French Drain

Connecting Gutter to French Drain


Don’t despair! We provide Sprinkler Repair.

OK the rhyme is a little lame but it is no reflection on the quality of service or the level of expertise that we provide.

Oklahoma Drainage and Sprinkler Repair has been providing Expert Sprinkler Repair since 1993.  During that time we have seen it all and done it all where residential Sprinkler Repair is concerned.

We service all of Central and Western Oklahoma.

1 SPRINKLER VALVE

Replacing Broken Sprinkler Valve in Norman.

If you need a Sprinkler Head moved, adjusted, repaired or replaced we can handle the job.

If you have any type of problem with your sprinkler valves we can provide the solution.

Sprinkler Controller trouble?  No Problem.  We service all brands and models.

 

Many times Sprinkler Wires get damaged or cut.  Sprinkler Wiring runs underground from the Sprinkler Valves to the Sprinkler Controller.  Many times the wires become damaged when digging is done in your yard.  Installing new phone lines for example causes cuts in Sprinkler Wire.

If the phone lines are installed during the winter when the Sprinkler System is not being used, you may not realize that you have a problem until the following spring.

Finding cut sprinkler wiring can be very difficult.  This is one area where there is no substitute for experience.

Oklahoma Drainage and Sprinkler Repair has been finding Cut Sprinkler Wires and fixing them since 1993.

Installing in-line drains in a sprinkler system is a service that we also provide.  Many times a sprinkler system has no drains put in when the Sprinkler System is first installed.

We are happy to install them for you.

An in-line sprinkler drain automatically drains all the water out of the Sprinkler Pipes immediately after your sprinkler system runs.  This relieves stress on the pipes and joints and also prevents pipes from freezing and breaking because there is still water in your system from last summer.  SPRINKLER PIPES CAN’T FREEZE IF THERE IS NO WATER IN THEM.

 


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

FRENCH DRAIN IN EDMOND OKLAHOMA

Oklahoma Drainage and Sprinkler RepairFrench Drain Installation, Drainage System Design, Expert Lawn Sprinkler RepairDrain Repair 

channel drain driveway

Channel Drain set in Driveway

Recently Oklahoma Drainage and Sprinkler Repair installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

 

Curb Outlet for French Drain in Edmond

Curb Outlet for French Drain in Edmond

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

 

A French Drain Can Handle Standing Water

 FRENCH DRAIN IN EDMOND OKLAHOMA, DRAINAGE CONTRACTOR

Oklahoma Drainage and Sprinkler Repair Recently  installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

 

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

Oklahoma Drainage and Sprinkler Repair Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

 

Keep water off your driveway with a channel drain

 Standing water comes from many sources.  It causes damage to  sidewalks, driveways, and foundations not to mention plants, trees, and  grass.  Does the side of your house flood because your neighbor doesn’t  have gutters, or does your sidewalk turn into a moat after a heavy rain,  or worst of all, is water seeping into your foundation and duct work  after a thunderstorm?  Theses are just a few of the Drainage  Problems that Oklahoma Drainage and Sprinkler Repair can help with.  We can design a Drainage  System to fit your specific needs.  We install many types  of Drains  to solve many types of problems.    French  Drains, Surface  Drains, Channel  Drains, Basement  Drains, Trench Drains, Basin Drains, and Sump  Pumps are utilized.

 

 

Just what is a “French Drain?”  Many times people incorrectly

use the phrase, “French Drain,”  to apply to many different types of Drains that could be used in a Drainage System.  The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.”

A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drain Pipe is connected underground to an outlet on the Drain BasinStorm-Water Drains through the grate into the Drain Basin.  Once in the Drain Basin,basin through a Drain Pipe.  The Storm-Water continues downhill in an underground Drain Pipe to an exit point.

THIS IS NOT A FRENCH DRAIN!

A Surface Drain may come in many different shapes or sizes.  The Drain Grate may be round or square.  Here is a picture of a common Surface Drain.

Cutting the Curb for a French Drain Outlet

Surface Drain and Drain Pipe

A Channel Drain is a type of Surface Drain and many times is installed in


Norman Oklahoma French Drain System, Sprinkler Repair

French Drain Installation in Norman

Recently  Norman Oklahoma had 4 inches of rain in two hours.  That’s the most rain in a short time that I can remember.  Storm-Water runoff can cause damage to all types of property and buildings.  Water getting inside your house is never a good thing.  A Drainage System that utilizes a French Drain can help.  Drains can protect your home and property from water damage.  Oklahoma Drainage and Sprinkler Repair installs a wide variety of Drains in many different places.  A Drain or Group of Drains with Drain Pipe going to an exit point is a “Drainage System.”

Large 6 Inch French Drain Installed in Norman
Large 6 Inch French Drain Installed in Norman

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.

Surface Drain Installed next to sidewalk in Oklahoma City.
Surface Drain Installed next to sidewalk in Oklahoma City.

2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A Surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the Drain Pipe that is connected to the Drain.

Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows down hill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drain Pipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains

3 inch, 4 inch, and 6 inch Drain Pipes

3 inch, 4 inch, and 6 inch French Drains

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

The Drainage Pop-Up Emitter is connected to the end of a Drain Pipe.  It is downhill from a French Drain or a Surface Drain.  It is a small release basin with a green pop-up lid.  When releasing water, it pops up about an inch to release the water from the French Drain or Surface Drain.  When the Storm Water has moved through the Drainage System and out of the Pop-Up Emitter, the green lid closes back to its original closed position.  The emitter is designed to release water out into a yard or down a hill or other desirable Drainage Exit Point where there is no curb.

Popup Emitter to release water from a Drainage System in Yukon.
Popup Emitter to release water from a Drainage System in Yukon.

Drainage System installationand design is a big part of our business.  Does your sidewalk turn into a moat after a hard rain?  Does part of your yard look like a pond after a thunderstorm?  Worst of all, are you experiencing concrete deterioration to your foundation, sidewalk, or driveway.  We can design a Drainage System to solve your Drainage Problems Our Drainage Systems can be simple or complex.  We utilize, French Drains, Surface Drains, Channel Drains, Basin Drains, Basement Drains, Trench Drains, andSump Pumps.  Estimates are free!

French Drain Installation In Yukon

Oklahoma Drainage and Sprinkler Repair : Servicing all of Central and Western Oklahoma since 1993.

Standing Water on Your Driveway?  A Surface Drain set in concrete may be what you need. Or maybe you need a French Drain Running alongside your driveway instead.  Handling water problems is what we are good at.  If you need help, Oklahoma Drainage can provide the best solution for your unwanted water problems.

A good place for a French Drain

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

 Oklahoma Drainage and Sprinkler Repair

Hey Oklahoma, We are expanding to service all of Western Oklahoma as well as Central Oklahoma.  If you live in Elk City, and need a French Drain, we can help.  If water is standing on your driveway in Clinton, Give us a call.  Duncan, Lawton, and Altus are all new areas of service for us.

Since 1993 Oklahoma Drainage and Sprinkler Repair has solved all types of standing water and drainage issues.  We install Drainage Systems that utilize French Drains, Surface, Drains, Channel Drains, and Sump Pumps depending on the customers needs.

If you have water in the wrong place , we can help!

We also have Decades of experience repairing all types of Lawn Sprinkler Problems.  Fixing broken sprinkler heads, sprinkler valve problems and controller trouble just to name a few things.

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

A French Drain Can Handle Standing Water

A French Drain can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water in a large area in your yard?  Typically this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

Gutter Downspout Connected to 6 Inch French Drain

Recently we installed a French Drain inside the court yard of a rest home in Norman.  We had several interesting challenges to overcome that were not typical for a French Drain Installation.  The court yard was in the center of the home and was a secure area for the patrons.  We had to put down painters tarps to run our wheel barrows over.  We took out 44 loads of dirt and brought in 52 loads of Crushed one inch lime stone for the French Drain.  Each trip was over a hundred yards from the trailer in the parking lot, in the front door, down the hall, making two turns along the way.  Each time we had to be escorted by security.  Needless to say, the installation of this particular drainage system took a while.In the above picture, the French Drain runs along the low area crossing all the areas where water would stand each time it rained.

French Drain in Rest Home Courtyard

When a French Drain is installed, a big mistake that is made by many people is to cover up the gravel with dirt.  This is a big mistake.  Basically it is ” Putting the cork back in the bottle.”  If the French Drain is in full sun and has a type of grass surrounding it that spreads on its own such a ” Tift” or “Bermuda” , Grass will grow over it and the French Drain will eventually disappear.  Grass covering a French Drain is a good thing if it grows across the drain without adding dirt.  The Grass thatch acts a water filter preventing clogging and extending the life of the Drainage System.

When a French Drain is in Full Shade, or the surrounding grass will not spread on its own, such as with Fescue,  other steps must be taken.  One option is to just leave it alone.  If you don’t mind how it looks, it will drain a large amount of water for many years.  Many times a French Drain can be a landscaping focal point.  They can be dressed up with all kinds of Rocks and Stones and Plants.

 

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We  take great pride in the Sprinkler Repair Services that we provide.  In almost 26  years of service, We have  has solved virtually every Sprinkler Repair Problem possible.  We solve Sprinkler Repair Problems that other companies can’t handle.  If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call. or send us an e-mail.

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

The above are the most common problems that we deal with.

Oklahoma Drainage and Sprinkler Repair can help if you need to re-design your sprinkler system. If for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard. We can redesign or add-on to sprinkler systems where the home owners needs change.

 


French Drain Installation In Yukon

Oklahoma Drainage and Sprinkler Repair : Servicing all of Central and Western Oklahoma since 1993.

Standing Water on Your Driveway?  A Surface Drain set in concrete may be what you need. Or maybe you need a French Drain Running alongside your driveway instead.  Handling water problems is what we are good at.  If you need help, Oklahoma Drainage can provide the best solution for your unwanted water problems.

standing water

A good place for a French Drain

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

 Oklahoma Drainage and Sprinkler Repair

Hey Oklahoma, We are expanding to service all of Western Oklahoma as well as Central Oklahoma.  If you live in Elk City, and need a French Drain, we can help.  If water is standing on your driveway in Clinton, Give us a call.  Duncan, Lawton, and Altus are all new areas of service for us.

Since 1993 Oklahoma Drainage and Sprinkler Repair has solved all types of standing water and drainage issues.  We install Drainage Systems that utilize French Drains, Surface, Drains, Channel Drains, and Sump Pumps depending on the customers needs.

If you have water in the wrong place , we can help!

We also have Decades of experience repairing all types of Lawn Sprinkler Problems.  Fixing broken sprinkler heads, sprinkler valve problems and controller trouble just to name a few things.

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

river rock french drain

A French Drain Can Handle Standing Water

A French Drain can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water in a large area in your yard?  Typically this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

 

French Drain Installation In Yukon

Oklahoma Drainage and Sprinkler Repair : Servicing all of Central and Western Oklahoma since 1993.

Standing Water on Your Driveway?  A Surface Drain set in concrete may be what you need. Or maybe you need a French Drain Running alongside your driveway instead.  Handling water problems is what we are good at.  If you need help, Oklahoma Drainage can provide the best solution for your unwanted water problems.

standing water

A good place for a French Drain

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

 Oklahoma Drainage and Sprinkler Repair

Hey Oklahoma, We are expanding to service all of Western Oklahoma as well as Central Oklahoma.  If you live in Elk City, and need a French Drain, we can help.  If water is standing on your driveway in Clinton, Give us a call.  Duncan, Lawton, and Altus are all new areas of service for us.

Since 1993 Oklahoma Drainage and Sprinkler Repair has solved all types of standing water and drainage issues.  We install Drainage Systems that utilize French Drains, Surface, Drains, Channel Drains, and Sump Pumps depending on the customers needs.

If you have water in the wrong place , we can help!

We also have Decades of experience repairing all types of Lawn Sprinkler Problems.  Fixing broken sprinkler heads, sprinkler valve problems and controller trouble just to name a few things.

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

A French Drain can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water in a large area in your yard?  Typically this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

gutter connect to drain

Gutter Downspout Connected to 6 Inch French Drain

Recently we installed a French Drain inside the court yard of a rest home in Norman.  We had several interesting challenges to overcome that were not typical for a French Drain Installation.  The court yard was in the center of the home and was a secure area for the patrons.  We had to put down painters tarps to run our wheel barrows over.  We took out 44 loads of dirt and brought in 52 loads of Crushed one inch lime stone for the French Drain.  Each trip was over a hundred yards from the trailer in the parking lot, in the front door, down the hall, making two turns along the way.  Each time we had to be escorted by security.  Needless to say, the installation of this particular drainage system took a while.In the above picture, the French Drain runs along the low area crossing all the areas where water would stand each time it rained.

Rest home french drain

French Drain in Rest Home Courtyard

When a French Drain is installed, a big mistake that is made by many people is to cover up the gravel with dirt.  This is a big mistake.  Basically it is ” Putting the cork back in the bottle.”  If the French Drain is in full sun and has a type of grass surrounding it that spreads on its own such a ” Tift” or “Bermuda” , Grass will grow over it and the French Drain will eventually disappear.  Grass covering a French Drain is a good thing if it grows across the drain without adding dirt.  The Grass thatch acts a water filter preventing clogging and extending the life of the Drainage System.

When a French Drain is in Full Shade, or the surrounding grass will not spread on its own, such as with Fescue,  other steps must be taken.  One option is to just leave it alone.  If you don’t mind how it looks, it will drain a large amount of water for many years.  Many times a French Drain can be a landscaping focal point.  They can be dressed up with all kinds of Rocks and Stones and Plants.

 

Just what is a “French Drain?”  Many times people incorrectly

French drain installed
A French Drain can protect your foundation!

use the phrase, “French Drain,”  to apply to many different types of Drains that could be used in a Drainage System.  The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.”

A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drain Pipe is connected underground to an outlet on the Drain Basin Storm-Water Drains through the grate into the Drain Basin.  Once in the Drain Basin, water travels out of the basin through a Drain Pipe.  The Storm-Water continues downhill in an underground Drain Pipe to an exit point.

THIS IS NOT A FRENCH DRAIN!

A Surface Drain may come in many different shapes or sizes.  The Drain Grate may be round or square.  Here is a picture of a common Surface Drain.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged.

The dirt that was taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is Ok.  It won’t have a measurable effect on the performance of the drain.
DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

nice rock
French Drains Can Look Great!

 

Installing Cement around Curb Fitting for French Drain

Installing Cement around Curb Fitting for French Drain

 

A French Drain will move large amounts of water from the Drainage Problem Area to the Exit point.

A French Drain will Drain away water that gets to the Drainage Problem Area in 3 ways.

1.  Water gets to the problem area by falling from the sky.

2.  Water gets to the problem area by flowing down hill over the ground.

3.  Water gets to the problem area by flowing underground. (Sub-Surface water flow)

Number 3, Sub-Surface water flow is the big consideration.  When doing a Drainage Diagnostic, this is the area that is many times missed or not considered by less experienced companies.  Oklahoma  Drainage and Sprinkler Repair  relies on 26 years of experience.  Many Times it is cheaper and more effective to install a French Drain over a Surface Drain.  A Surface Drain can’t move as much water as a French Drain, and a Surface Drain can’t Drain away Sub-Surface waterSurface Drains should be installed in areas where the Drainage Problem area is smaller and is not affected by sub-surface water.

The draw back to a French Drain, is that it is not a pretty as a Surface Drain.

French Drains do a great job running along foundations and driveways.  A French Drain will keep water away from cement and prevent damage to concrete if water should freeze up against it.  A French Drain can keep your foundation Dry.

.

black and white

A good drain outlet should be black and white


Sprinkler RepairSprinkler ValvesSprinkler HeadsLeaking Pipes – Everything you might need repaired or adjusted with your sprinkler system.

Oklahoma Drainage and Sprinkler Repair – On the Job since 1993 – Servicing Western and Central Oklahoma

Oklahoma Drainage and Sprinkler Repair installs a variety of other types of Drains.  Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, and Sump Pumps.  In the past 26 years, we have installed French Drains to keep water away from home and business foundations, Surface Drains to keep water away from sidewalks and driveways,  Trench Drains, and French Drains to keep standing water out of flowerbeds and yards, and Sump Pumps to remove water from basements and outdoor low lying areas.

Sprinkler Repair is also a central focus for Oklahoma Drainage and Sprinkler Repair.  Since 1993 we have provided Expert Sprinkler Repair for all of Central Oklahoma.  Now in 2020 we are expanding all our Sprinkler Repair and Drainage Services to include all of Western Oklahoma as well.

 

 

Oklahoma Drainage and Sprinkler Repair 

We Repair

1. Broken Sprinkler Heads

2.  Leaking Sprinkler Valves

3.  Broken Back-Flow Valve

4.  Broken Sprinkler Pipes

5.  Defective Sprinkler Clock or Controller

Oklahoma Drainage and Sprinkler Repair can help with these and any other Sprinkler Problems.

 

 

French Drain with stepping stones

French Drain with stepping stones

Oklahoma Drainage and Sprinkler Repair –  Have your seen something like this in your yard?

We service all sprinkler head problems.  If the top of your sprinkler Head has weed eater damage, we can install a new one for you.  If your sprinkler head is working OK but is spraying in the wrong place, we can adjust them too.  If something changes in your yard and a sprinkler head needs to be moved to a better location, it’s no problem.

Experience counts with sprinkler repair.  It is very easy to waste time and money.  There are many mistakes that can easily avoided.  We recently took over a sprinkler repair in Moore from another sprinkler repair company.  The customer had spent a large amount of money replacing their Sprinkler Valves because nothing was working.  We showed up and discovered that the ground wire in the sprinkler controllerhad accidentally plugged into the zone one outlet.  It took us 30 seconds to fix the problem.

Oklahoma Drainage and Sprinkler Repair has provided Expert Sprinkler Repairfor broken sprinkler heads like the one shown above for over 25 years.

 

 

 

Above ground Back Flow Valves many times have problems.  They easily freeze and break during the winter.  When they break, they leak, and usually its a lot of water.  Oklahoma Drainage and Sprinkler Repair has replaced them since 1993.  We also can provide solutions to keep back flow valves from freezing in the first place.

 

 

Sprinkler Valves are a source of Sprinkler Problems.  Sometimes they stick open and won’t shut off.  Even if you turn off or unplug the sprinkler controller.  Other times a sprinkler valve won’t come when its suppose to.  Oklahoma Drainage and Sprinkler Repairhas decades of experience adjusting or replacing sprinkler valves.

 

Broken Sprinkler Head took about an hour to fix.

 

 

FRENCH DRAINS AS PART OF A DRAINAGE SYSTEM OR BY THEMSELVES

A French Drain can be a part of aDrainage System or can stand alone.  A Drainage System is made up of one or several types of Drains connected in sequence moving down hill toward an exit or release point.  What makes up or determines the recipe of a Drainage System depends on the “Drainage Diagnosis.”  EveryDrainage Systemis unique to some degree.

French Drain Trench Going Under Sidewalk

French Drain Trench Going Under Sidewalk

For Example, A four inch French Drain may run across a hillside, transition to solid 4 inch Solid Drain Pipe while running under a sidewalk, then connecting into a 12 inch Surface Drain in a low spot,  Solid Drain Pipe then could continue to a garage foundation where the Solid Drain Pipe changes back to 4 inch French Drain again and runs along the foundation for say 60 feet.  Next the French Drain changes again to 4 inch Solid Drain Pipe and continues under a fence to a Pop-Up Emitter which is the exit point.  This again is just one example of a Drainage System with 2 French Drains and one Surface Drainbeing the main parts.  This would be considered a “Complex Drainage System.”

A simple Drainage System might be a 6 inch French Drain running along a driveway, turning slightly and changing to 6 inch Solid Drain Pipe and continuing to a Curb Fitting as an Exit Point.

French Drain Installation, Surface Drain Installation, Drainage System Installation

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

   Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

FRENCH DRAIN DESIGN

French Drain Design must take into account many variables.  One consideration for a French Drain that many times is missed, is the type of soil.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.  The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.  A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Linersare relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

Determining  the size of the French Drain Pipe can be difficult.  If the French Drain is not very big and has no Gutter Down-Spouts or Surface Drains connected to it then 3 inch or 4 inch French Drain Pipe may be used.  If the French Drain is large or has many gutters or Surface Drains connected into it, then you should use 6 Inch French Drain Pipeor larger.

French Drain Pipe Installation

French Drain Pipe Installation

French Drain Design is also determined by the Problem Drainage Area.  If water is moving into the Problem Drainage Area underground (Sub-Surface), then installing aFrench Drain is a “Must!”  French Drains can move Sub-Surface water as well as Surface Water.  Surface Drains can only move Surface Water.  This is why French Drains do such a good job protecting driveways, sidewalks, and foundations.

Oklahoma Drainage and Sprinkler Repair installs French Drains and Drainage Systems in all of Central Oklahoma including:  Oklahoma City, Norman, Edmond, Moore, Mustang, Yukon, and Midwest City.

Oklahoma Drainage and Sprinkler Repair 405 203 9419

French Drain Installation —   French Drainsare designed to do a lot of things.  If you have an area that has unwanted water standing in it or running across it, a French Drain can be the answer.  A French Drain is a trench that runs across the Drainage Problem Area.  A French Drain Pipe is placed in the bottom of the trench.  The French Drain Pipe is perforated with thousands of small holes.  In most cases the Drain Pipe has a nylon soc around the pipe to act as a filter for the French Drain.  The French Drain trench is then filled with some type of small rock or stone.  We typically uses crushed 1 inch Lime Stone to cover the French Drain Pipe.  The dirt that was dug out of the trench is taken away or spread out around the French Drain.  The Lime Stone replaces the dirt and fills the French Drain Trench all the way to the surface.

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

Oklahoma Drainage and Sprinkler Repair Recently installed a Drainage System in Nichols Hills.  The Drainage Systemwas made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipeswere in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

When Installing a French Drain as part of a Drainage System, there are many things to consider.

What is the primary source of water coming into the problem drainage area.

Are there secondary sources of water entering the area.

What are they and how many.

How fast does water enter the area and how often.

What are the potential exit points for the water,  Where do we want to take the water too.  Is there more than one potential exit point to increase drainage capacity.

Does the customer want a Drainage System or a Flood Prevention System and does he understand the difference.

 

Oklahoma Drainage and Sprinkler Repair recently diagnosed a Drainage Problem in  South Oklahoma City.  The Home owner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.  The French Drain Pipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drain pipe.  In the end, we were able to dig up the pipe and Replace it.

CHECK OUT OUR PHOTO LIBRARY!

Photos of French Drains

Photos of Surface Drains

Photos of Channel Drains

Photos of Sprinkler System Installation

Photos of Sprinkler Repair

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

 

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, We specializes in just that!

 


Oklahoma Drainage and Sprinkler Repair –  Have your seen something like this in your yard?

We service all sprinkler head problems.  If the top of your sprinkler Head has weed eater damage, we can install a new one for you.  If your sprinkler head is working OK but is spraying in the wrong place, we can adjust them too.  If something changes in your yard and a sprinkler head needs to be moved to a better location, it’s no problem.

Experience counts with sprinkler repair.  It is very easy to waste time and money.  There are many mistakes that can easily avoided.  We recently took over a sprinkler repair in Moore from another sprinkler repair company.  The customer had spent a large amount of money replacing their Sprinkler Valves because nothing was working.  We showed up and discovered that the ground wire in the sprinkler controller had accidentally plugged into the zone one outlet.  It took us 30 seconds to fix the problem.

Oklahoma Drainage and Sprinkler Repair has provided Expert Sprinkler Repair for broken sprinkler heads like the one shown above for over 25 years.

 

 

 

Above ground Back Flow Valves many times have problems.  They easily freeze and break during the winter.  When they break, they leak, and usually its a lot of water.  Oklahoma Drainage and Sprinkler Repair has replaced them since 1993.  We also can provide solutions to keep back flow valves from freezing in the first place.

 

 

Sprinkler Valves are a source of Sprinkler Problems.  Sometimes they stick open and won’t shut off.  Even if you turn off or unplug the sprinkler controller.  Other times a sprinkler valve won’t come when its suppose to.  Oklahoma Drainage and Sprinkler Repair has decades of experience adjusting or replacing sprinkler valves.

 

Broken Sprinkler Head took about an hour to fix.

Replaced leaking valves

Replaced leaking Sprinkler Valves

 

FRENCH DRAINS AS PART OF A DRAINAGE SYSTEM OR BY THEMSELVES

A  French Drain can be a part of a Drainage System or can stand alone.  A Drainage System is made up of one or several types of Drains connected in sequence moving down hill toward an exit or release point.  What makes up or determines the recipe of a Drainage System depends on the “Drainage Diagnosis.”  Every Drainage System is unique to some degree.

French Drain Trench Going Under Sidewalk

French Drain Trench Going Under Sidewalk

For Example, A four inch French Drain may run across a hillside, transition to solid 4 inch Solid Drain Pipe while running under a sidewalk, then connecting into a 12 inch Surface Drain in a low spot,  Solid Drain Pipe then could continue to a garage foundation where the Solid Drain Pipe changes back to 4 inch French Drain again and runs along the foundation for say 60 feet.  Next the French Drain changes again to 4 inch Solid Drain Pipe and continues under a fence to a Pop-Up Emitter which is the exit point.  This again is just one example of a Drainage System with 2 French Drains and one Surface Drain being the main parts.  This would be considered a “Complex Drainage System.”

A simple Drainage System might be a 6 inch French Drain running along a driveway, turning slightly and changing to 6 inch Solid Drain Pipe and continuing to a Curb Fitting as an Exit Point.

French Drain Installation, Surface Drain Installation, Drainage System Installation

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

FRENCH DRAIN DESIGN

French Drain Design must take into account many variables.  One consideration for a French Drain that many times is missed, is the type of soil.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.  The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.  A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

Determining  the size of the French Drain Pipe can be difficult.  If the French Drain is not very big and has no Gutter Down-Spouts or Surface Drains connected to it then 3 inch or 4 inch French Drain Pipe may be used.  If the French Drain is large or has many gutters or Surface Drains connected into it, then you should use 6 Inch French Drain Pipe or larger.

French Drain Pipe Installation

French Drain Pipe Installation

French Drain Design is also determined by the Problem Drainage Area.  If water is moving into the Problem Drainage Area underground (Sub-Surface), then installing a French Drain is a “Must!”  French Drains can move Sub-Surface water as well as Surface Water.  Surface Drains can only move Surface Water.  This is why French Drains do such a good job protecting driveways, sidewalks, and foundations.

Oklahoma Drainage and Sprinkler Repair installs French Drains and Drainage Systems in all of Central Oklahoma including:  Oklahoma City, Norman, Edmond, Moore, Mustang, Yukon, and Midwest City.

Oklahoma Drainage and Sprinkler Repair 405 203 9419

French Drain Installation —   French Drains are designed to do a lot of things.  If you have an area that has unwanted water standing in it or running across it, a French Drain can be the answer.  A French Drain is a trench that runs across the Drainage Problem Area.  A French Drain Pipe is placed in the bottom of the trench.  The French Drain Pipe is perforated with thousands of small holes.  In most cases the Drain Pipe has a nylon soc around the pipe to act as a filter for the French Drain.  The French Drain trench is then filled with some type of small rock or stone.  We typically uses crushed 1 inch Lime Stone to cover the French Drain Pipe.  The dirt that was dug out of the trench is taken away or spread out around the French Drain.  The Lime Stone replaces the dirt and fills the French Drain Trench all the way to the surface.

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

Oklahoma Drainage and Sprinkler Repair Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

When Installing a French Drain as part of a Drainage System, there are many things to consider.

What is the primary source of water coming into the problem drainage area.

Are there secondary sources of water entering the area.

What are they and how many.

How fast does water enter the area and how often.

What are the potential exit points for the water,  Where do we want to take the water too.  Is there more than one potential exit point to increase drainage capacity.

Does the customer want a Drainage System or a Flood Prevention System and does he understand the difference.

 

Oklahoma Drainage and Sprinkler Repair recently diagnosed a Drainage Problem in  South Oklahoma City.  The Home owner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.  The French Drain Pipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drain pipe.  In the end, we were able to dig up the pipe and Replace it.

CHECK OUT OUR PHOTO LIBRARY!

Photos of French Drains

Photos of Surface Drains

Photos of Channel Drains

Photos of Sprinkler System Installation

Photos of Sprinkler Repair


Oklahoma Drainage had a customer in Lawton with water in their floor vents.  Every time the heater would run, it would spit water out of the vents.  Water was seeping through the foundation and into the ducts.  Cold water and warm air can cause mold to develop.  After a good duct cleaning company got all the water out, we went to work.  We installed a 6 inch French Drain three feet from of the foundation across the entire width of the house.  It intercepted all the surface water running down the hill.  More importantly it caught and stopped all the sub surface water traveling underground through the sandy soil.  The floor ducts stayed dry!

Oklahoma Drainage also installs a variety of other types of Drains.  Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, and Sump Pumps.  In the past 26 years, we have installed French Drains to keep water away from home and business foundations, Surface Drains to keep water away from sidewalks and driveways,  Trench Drains, and French Drains to keep standing water out of flowerbeds and yards, and Sump Pumps to remove water from basements and outdoor low lying areas.

French Drain with stepping stones

French Drain with stepping stones

 

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

 

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give CMG a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, We specialize in just that!

 

 

For most of us our home or business is our most important investment.  Standing Water can cause damage to what is important to us.  High Water from Storm-Water Runoff deteriorates concrete and cement.  This means that our driveways, sidewalks, and foundations need protection from prolonged exposure to Standing Water.  (Not to mention damage to plants, trees, and grass) WE have have been solving Drainage Problems since 1993.  If you live in Central Oklahoma we can quickly provide a free estimate.


Drainage System Installation in Norman

Hard rain and Flooding is becoming more common.

Protect your home or business with a French Drain or Drainage System From Oklahoma Drainage and Sprinkler Repair.

  Drainage System Installation is becoming one of the areas of business for us.  In 26 years we have become more accomplished at solving  Drainage Problems for our customers.  Water can cause damage in all kinds of places.  A Drainage System, simply put, is a Drain with a Drain  Pipe leading underground to an exit point.

A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation.  We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it.

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

 

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.   With over 25 years of experience we provide top quality French Drains, Drainage Systems, and Sprinkler Repair.

 

French Drain in Oklahoma City

 

We Service all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.  Now we provide service to Lawton and Altus as well.

 

Water can cause damage in all kinds of places.  A Drainage System, simply put, is a Drain with a Drain  Pipe leading underground to an exit point.  Most Drainage Systems utilize a French Drain or a Surface Drain, or both.

Oklahoma Drainage and Sprinkler Repair provides Drainage Diagnostics  .  A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation.  We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it.  French Drains and Surface Drains are used to make up the Drainage System.

Typically many things must be considered when completing a Drainage Diagnostic.

1.  Identify the areas being damaged by water and determine if there are any hidden areas.

2.  Identify the sources of water causing the damage.  Most Drainage Problems have more than one source.  A water source can fall from the sky as rain, or can flow down the hill as storm-water runoff, or can flow from a gutter down-spout (yours or your neighbor’s),  or flow under ground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street.  (These are the most common)

3.  Identify the Exit Point by determining where we want to take the unwanted water.

4.  Determine what type of Drains can best solve the Drainage Problem.  We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.

5.  Determine what type and size of Drain Pipe is needed to accommodate the volume of water to be drained.  Larger is always better!  Big Drains with Small Drain Pipes never works!

If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give CMG a Call!  TYPICALLY A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!

 

Typically many things must be considered when completing a Drainage Diagnostic.

1.  Identify the areas being damaged by water and determine if there are any hidden areas.

2.  Identify the sources of water causing the damage.  Most Drainage Problems have more than one source.  A water source can fall from the sky as rain, or can flow down the hill as storm-water runoff, or can flow from a gutter down-spout (yours or your neighbor’s),  or flow under ground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street.  (These are the most common)

3.  Identify the Exit Point by determining where we want to take the unwanted water.

4.  Determine what type of Drains can best solve the Drainage Problem.  We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.

5.  Determine what type and size of Drain Pipe is needed to accommodate the volume of water to be drained.  Larger is always better!  Big Drains with Small Drain Pipes never works!

If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give Us a Call!  TYPICALLY A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installation In Downtown Oklahoma City

French Drain

A little bit North of Downtown Oklahoma City,  We installed a 6 inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6 inch French Drain between the two.

French Drain connected to gutter

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Curb Outlet for French Drain

The French Drain had a Double Exit Point.  This means that once water entered the French Drain Pipe, it could run South to the street or it could run North to the alley.  To exit points greatly increases the water capacity for any French Drain.

Along the course of the French Drain, we connected two large gutters directly into the Drain Pipe.

Once in place, the French Drain eliminated all the water that was leaking into the two buildings.

Drainage Problem Solved!

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

 

A French Drain Can Handle Standing Water

 

Oklahoma Drainage and Sprinkler Repair Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Now we are expanding our service area to include : Lawton, Altus, Duncan, Chickasha, Elk City, and all of Western Oklahoma.