Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

When Installing a French Drain as part of a Drainage System, there are many things to consider.

What is the primary source of water coming into the problem drainage area.

Are there secondary sources of water entering the area.

What are they and how many.

How fast does water enter the area and how often.

What are the potential exit points for the water,  Where do we want to take the water too.  Is there more than one potential exit point to increase drainage capacity.

Does the customer want a Drainage System or a Flood Prevention System and does he understand the difference.

 

Oklahoma Drainage and Sprinkler Repair recently diagnosed a Drainage Problem in  South Oklahoma City.  The Home owner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.  The French Drain Pipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drain pipe.  In the end, we were able to dig up the pipe and Replace it.

New Trench for French Drain

Next we installed a new exit for the water by installing a curb fitting.

No more flooding in the customers basement.  A few weeks later our customer was able to lay carpet in the basement with no problems.

French Drain Installed Along Stem Wall

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

 

A French Drain Can Handle Standing Water

 

Oklahoma Drainage and Sprinkler Repair Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Now we are expanding our service area to include : Lawton, Altus, Duncan, Chickasha, Elk City, and all of Western Oklahoma.

 

 

 

 

Keep water off your driveway with a channel drain

 Standing water comes from many sources.  It causes damage to  sidewalks, driveways, and foundations not to mention plants, trees, and  grass.  Does the side of your house flood because your neighbor doesn’t  have gutters, or does your sidewalk turn into a moat after a heavy rain,  or worst of all, is water seeping into your foundation and duct work  after a thunderstorm?  Theses are just a few of the Drainage  Problems that Oklahoma Drainage and Sprinkler Repair can help with.

We can design a Drainage  System to fit your specific needs.  We install many types  of Drains  to solve many types of problems.    French  Drains, Surface  Drains, Channel  Drains, Basement  Drains, Trench Drains, Basin Drains, and Sump  Pumps are utilized.

 

 

4 Inch Drain Pipe Ready to be covered with dirt in Norman.
4 Inch Drain Pipe Ready to be covered with dirt in Norman.

Installing Drainage Curb Fitting for a French Drain in South Oklahoma City

 

Curb Fitting with Acrylic Cement For French Drain

 

FRENCH DRAIN  CONNECTED TO GUTTERS

Many different types of Drains can be hooked together by one Drain Pipe.  The Drain Pipe then running to an Exit Point makes up a Drainage System.  One common type of Drain used in a Drainage System is A “French Drain.”  Many times a French Drain is installed close to a building foundation or in a low area next to a home or business.  This puts the French Drain in close proximity to Gutter Down Spouts.  Rather than have water come off the roof and out the Down Spout and on to the ground below, many times it is much better to tie a Gutter Down Spout Directly into a French Drain or near by Drain Pipe depending on the Drainage System Design.   Connecting The Down Spouts Directly into a French Drain is much  more efficient and causes suction to occur in the French Drain.  Connection of Gutter Down Spouts to a French Drain makes the Drainage System work better.

Connecting Gutter into French Drain System

Gutter Down Spout Connected to French Drain

 

French Drain Pipe running to curb outlet in Oklahoma City.

French Drain Pipe running to curb outlet in Oklahoma City.

French Drains can protect your home and property from water damage.  Oklahoma Drainage and Sprinkler Repair installs a wide variety of Drains in many different places.  A Drain or Group of Drains with Drain Pipe going to an exit point is a “Drainage System.”

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street. A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street. An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem. Drainage Systems can: 1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation. 2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the pipe that is connected to the drain. Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe. Drainage Systems quickly can become more complicated.  Considerations must include: How does the water get to the problem area?  There may be one or many sources. Water Sources: 1.  It falls from the sky directly 2.  It flows down hill over the surface (surface water) 3.  It flows underground under the surface (sub-surface water) 4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.) 5.  It flows from a gutter downspout 6.  It flows over the edge of a gutter because the gutter is too small is is clogged 7.  It flows up from the ground (seeps and springs are common in Oklahoma) 8.  It flows from a sprinkler system use ( yours or your neighbors) 9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves) There are other reasons for Drainage Problems, the above reasons are just the most common. Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drain Pipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water. For home and small business use typical materials used are: 6 inch, 9 inch, and 12 inch Surface Drains – 3 inch, 4 inch, and 6 inch Drain Pipes — 3 inch, 4 inch, and 6 inch French DrainsFrench Drains move more water than Surface Drains — French Drains move Surface Water and Sub-Surface Water Surface Drains move Surface Water only Surface Drains look nicer than French Drains in most cases Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?) The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

 

Curb Fitting with Acrylic Cement
Curb Fitting with Acrylic Cement

The Drainage Pop-Up Emitter is connected to the end of a Drain Pipe.  It is downhill from a French Drain or a Surface Drain.  It is a small release basin with a green pop-up lid.  When releasing water, it pops up about an inch to release the water from the French Drain or Surface Drain.  When the Storm Water has moved through the Drainage System and out of the Pop-Up Emitter, the green lid closes back to its original closed position.  The emitter is designed to release water out into a yard or down a hill or other desirable Drainage Exit Point where there is no curb.

Popup Emitter to release water from a Drainage System in Yukon.
Popup Emitter to release water from a Drainage System in Yukon.

Drainage System installation and design is a big part of our business.  Does your sidewalk turn into a moat after a hard rain?  Does part of your yard look like a pond after a thunderstorm?  Worst of all, are you experiencing concrete deterioration to your foundation, sidewalk, or driveway.  We can design a Drainage System to solve your Drainage Problems Our Drainage Systems can be simple or complex.  We utilize, French Drains, Surface Drains, Channel Drains, Basin Drains, Basement Drains, Trench Drains, and Sump Pumps.  Estimates are free!

Just what is a “French Drain?”  Many times people incorrectly use the phrase, “French Drain,”  to apply to many different types of Drains  that could be used in a Drainage System.   The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.” A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drain Pipe is connected underground to an outlet on the Drain Basin. Storm-Water Drains through the grate into the Drain Basin.  Once in the Drain Basin, water travels out of the basin through a Drain Pipe.  The Storm-Water continues downhill in an underground Drain Pipe to an exit point.

A Surface Drain may come in many different shapes or sizes.  It is a Drain Basin with a Drain Grate on top and a Drain Pipe connected on the side.  The Drain Grate may be round or square.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged.

A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes.  Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the drain.
DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.
DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

Sprinkler RepairLeaking Sprinkler Pipes, Broken Sprinkler Heads, Back-Flow Valve Problems, Moving Sprinkler Heads, Adjusting Sprinkler Heads, Sprinkler Wire Problems, Controller Programming Trouble, Sprinkler Valve Problems.  We do it all.

Oklahoma Drainage and Sprinkler Repair 405 203 9419

 

Oklahoma Drainage and Sprinkler Repair provides Emergency Sprinkler Repair Service, After Hours and Weekends.  405 203 9419

Sprinkler Repair is an ongoing issue for any sprinkler system.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.    We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Broken Sprinkler Head took about an hour to fix.

Today we did a sprinkler repair in Norman.  The sprinkler system needed a checkup.  We went through each sprinkler zone and identified several different problems.  Zone 2 had a cracked sprinkler pipe in a flower bed.  Zone 4 had a broken sprinkler rotor on the edge of the driveway that had been driven over and broken.  Zone 6 and 7 each had a couple of pop-up spray heads that were worn out and would not pop-up.  The diagnosis and the repair took less than two hours.  Now their  sprinkler system is running great!

Recently we fixed a sprinkler system that was poorly installed.

  The Sprinkler System Company that installed it didn’t know what they were doing.  There was no Master Valve installed in the Sprinkler System.  As a result, The Sprinkler Pipe between the water meter and the Sprinkler Valves stayed pressurized all the time.  This is bad during a cold snap in Oklahoma.  If a Master Valve and In-Line Pipe Drains had been installed originally, there would be no broken sprinkler pipes when it got too cold.    The Sprinkler Pipes would drain automatically.
Oklahoma Drainage and Sprinkler Repair also installs French Drains and Drainage Systems

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain,Oklahoma Drainage and Sprinkler Repair specializes in just that!

Emergency Sprinkler Repair Service — — Drainage SystemsFrench Drains Surface DrainsSump Pumps  Scheduled Sprinkler Repair

Servicing all of Central and Western Oklahoma

Spring is just around the corner.  Now is a good time to consider a Sprinkler System Checkup by Oklahoma Drainage and Sprinkler Repair.   We have been in business since 1993.

  Drainage Systems for Home owners and businesses including:  French Drains, Surface Drains, Channel Drains, Trench Drains, Basement Drains, Basin Drains, and Sump Pumps.

 


FRENCH DRAIN IN EDMOND OKLAHOMA

Recently Oklahoma Drainage and Sprinkler Repair installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

French Drain Trench under sidewalk and through curb

French Drain Installation, Drainage Systems, Surface Drain, Sump pumps, – Oklahoma Drainage and Sprinkler Repair

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage and Sprinkler Repair has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2000 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is help full in seeing underlying problems and secondary issues that may be hard to see at first for the ” Untrained Eye.”  This allows us to get things right the first time.  In this business EXPERIENCE TRULY COUNTS!

Hiring your brother in law to put in your Drainage System or French Drain is as bad as hiring a Lawn mowing company that does landscaping and drains too?  Water can cause a huge amount of damage.  How important is your money and your home?

Blane Callen, 405 203 9419

Is this your yard?

This is a great place for a French Drain

 

Curb Outlet for French Drain in Edmond

Curb Outlet for French Drain in Edmond

Running French Drain Pipe Under Sidewalk

Running French Drain Pipe Under Sidewalk


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installation, Drainage Systems, Surface Drain, Sump pumps, – Oklahoma Drainage and Sprinkler Repair

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage and Sprinkler Repair has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2000 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is help full in seeing underlying problems and secondary issues that may be hard to see at first for the ” Untrained Eye.”  This allows us to get things right the first time.  In this business EXPERIENCE TRULY COUNTS!

Hiring your brother in law to put in your Drainage System or French Drain is as bad as hiring a Lawn mowing company that does landscaping and drains too?  Water can cause a huge amount of damage.  How important is your money and your home?

Blane Callen, 405 203 9419

Is this your yard?

This is a great place for a French Drain

Do you have water standing in your yard after a hard rain?  Does your sidewalk become a moat during a thunder-storm?  Is standing water causing your foundation to deteriorate and break down?  Is water seeping into your home and causing mold?

A good place for a French Drain

Storm-water run off can cause many types of problems.  OKLAHOMA DRAINAGE AND SPRINKLER REPAIR can diagnose your drainage issues and design a Drainage System to fit your specific needs.  We install many types of drains including: French Drains, Channel Drains, Surface Drains, Basin Drains, Trench Drains, Basement Drains, and Sump Pumps.

 

Drainage Systems have several basic parts.

Water Entry

Water Transition

Water Exit

Water entry is the process where water enters the Drainage System.  This done with water entering drain pipe through a French Drain.  Water flows to a low area with a trench.  In the bottom of the trench is a Perforated French Drain Pipe with a liner or a soc.  Gravel or crushed limestone fills the trench on top of the French Drain Pipe.

Water can also enter a Drainage System through a Surface Drain.  Water flows to a Drainage Basin, falls through the grate and enters the Drain Pipe below.

A third way for water to enter is to connect Gutter Down Spouts Directly into a Drainage System.

Connecting Gutter into French Drain System

Connecting Gutter into French Drain System

Water Transition is moving water through Drain Pipe to the Exit Point.

Installation of a Drainage System, French Drain, In Norman Oklahoma

Installation of a Drainage System, French Drain, In Norman Oklahoma

Exit points are either Pop-Up Emitters or Curb outlets.

Curb outlet for a French Drain

Curb outlet for a French Drain

WE install French Drains and all types of Drainage Systems in Oklahoma City, Yukon, Edmond, Norman, Moore and Mustang.


Oklahoma Drainage and Sprinkler Repair –  We have provided Drainage Solutions and Expert Sprinkler Repair since 1993.

If you need a Sprinkler Valve Replaced in Moore, or if your Sprinkler Controller is not coming on at the correct time, we can help.  Servicing all of Central and Western Oklahoma.

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We at;Oklahoma Drainage and Sprinkler Repair, take great pride in the Sprinkler Repair Services that we provide.  In almost 26 years of service,We have solved virtually every Sprinkler Repair Problem possible.  We solve Sprinkler Repair Problems that other companies can’t handle.

This week we completed a Sprinkler System, ” Pool-Makeover.”  This is a common situation.  When a home owner installs a new swimming pool, a back-hoe is used to dig the hole for the pool.  Typically the existing Sprinkler System ends up in a pile with several tons of dirt.

Unfortunately,  Oklahoma Drainage and Sprinkler Repair was not the first choice for the home owner on the above mentioned, “Pool Makeover.”  The initial sprinkler company quit after two days.  They could not figure out which pipe went where, or what parts of the sprinkler system needed to be saved or replaced.

WE were called to step in and handle the Extreme Sprinkler Repair.  It took us 4 days but we solved all the Sprinkler System ProblemsThe Sprinkler System now works, and the water coverage is better than before the pool installation.

If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call.

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

Trenching a Sprinkler Systems in Moore Oklahoma
Trenching a Sprinkler Systems in Moore Oklahoma

The above are the most common problems that we deal with.

Oklahoma Drainage and Sprinkler Repair can help if you need to re-design your sprinkler system. If for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard. We can redesign or add-on to sprinkler systems where the home owners needs change.


Emergency Sprinkler Repair:

If your Sprinkler System keeps running and won’t shut off no matter what you do.  If your “Back Flow Valve” freezes and water is shooting everywhere.  If water is shooting up out of the ground from one of the sprinkler heads.  Give us a call even if it is “After Hours” or on “Weekends.”

Sprinkler Repair in Edmond.

Recently we got a call for a Sprinkler Repair for a broken sprinkler head.  A trash truck had backed up over a sidewalk to turn around.  The weight of the truck broke the sprinkler head and the pipe underneath.  The Sprinkler Repair took about an hour to complete.  In talking with the customer over the phone before we arrived, we were able to provide a price range that fixing this problem should cost.  We ran into no major complications conducting the Sprinkler Repair and our customer was very pleased and surprised with the cost.  The above Picture shows the Sprinkler Repair problem.

Winter Sprinkler Repair

Winter is a time when a lot can go wrong with a Sprinkler SystemSprinkler Repair is necessary for many reasons.  Sprinkler Pipes can freeze and break.  Sprinkler heads can crack or bust.  Above Ground Back-Flow Valves can crack or leak during some some of the warmest winters.    If you are having trouble with your Sprinkler Controller, or if you have a Sprinkler Head shooting out in the street, give us a call.

If you just have a question concerning your existing sprinkler system or are considering a new one, we are happy to share time and information with you!

Oklahoma Drainage and Sprinkler Repair — 405 203 9419

Do you have water running down the street from your sprinkler system in the middle of the night?  Has your Sprinkler “Back Flow Valve” frozen from cold weather and is shooting water everywhere? Is your sprinkler system running and won’t shut off no matter what you do?  Do you need help “After Hours” or on ” Weekends”?  Give us a Call!

 

Emergency Service

If you just have a question concerning your existing sprinkler system, we are happy to share time and information with you!

Water leaking anywhere in your yard

Sprinkler System won’t shut off

Back Flow Valve has frozen and broken

Any other Emergency Concerning Water Lines or Sprinkler Systems

Keeping a Sprinkler System running smoothly requires repair and maintenance from time to time.

Leaking Sprinkler Head

 

If you don’t have an Sprinkler Repair Emergency, Oklahoma Drainage and Sprinkler Repair also provides Scheduled Sprinkler Repair for the Central and Western parts of Oklahoma.

If you have Sprinkler heads that need to be moved or adjusted, or if you have a Sprinkler Zone that isn’t working, we can help with any Residential Sprinkler System Problem.

Oklahoma Drainage and Sprinkler Repair

405 203 9419

 

Lawn Irrigation Systems require maintenance from time to time.  All types of Sprinkler Repair become necessary.    Sprinkler heads break for several reasons.  Dogs chew up Sprinkler Heads.  Tree roots twist and break Sprinkler heads.  Cars run over and break Sprinkler Heads.  Weed Eaters cut the tops off Sprinkler Heads.  If you have a Sprinkler Head that is not performing perfectly, We can help.

Sprinkler Valves can have trouble too.  The Sprinkler Valve Wiring becomes disconnected or shorts out.  Tree Roots can stretch or break the Sprinkler WiresSprinkler Valves can start leaking over time. Oklahoma Drainage and Sprinkler Repair can solve Sprinkler Valve problems of all types.

The Sprinkler Valves that you see above are a mess.  They were leaking and weren’t working correctly.  We replaced the above Sprinkler Valves with the ones you see below.

New Sprinkler Valves installed in Norman

New Sprinkler Valves replacing the old ones shown above.

Sprinkler Valve installation in Edmond

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.    A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

 

We install Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give Oklahoma Drainage and Sprinkler Repair a call. 405 203 9419

 


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Edmond Oklahoma Sprinkler Repair —  Do you have trouble with leaking Sprinkler Valves?  Are your Sprinkler Heads in the wrong place or are they spraying in the wrong direction?  Do you have an “Above Ground” Back-Flow Valve that is leaking after our last cold snap?  Oklahoma Drainage and Sprinkler Repair can help.  We provide solutions for all Residential Sprinkler System Problems.

Sprinkler System Repair  Broken Sprinkler Heads — Sprinkler Controllers — Sprinkler Valves — All Brands

Sprinkler RepairLeaking Sprinkler Pipes, Broken Sprinkler Heads, Back-Flow Valve Problems, Moving Sprinkler Heads, Adjusting Sprinkler Heads, Sprinkler Wire Problems, Controller Programming Trouble, Sprinkler Valve Problems.  We do it all.

Oklahoma Drainage and Sprinkler Repair provides Emergency Sprinkler Repair Service, After Hours and Weekends.  405 203 9419

Sprinkler Repair is an ongoing issue for any sprinkler system.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.    We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Broken Sprinkler Head took about an hour to fix.

Today we did a sprinkler repair in Norman.  The sprinkler system needed a checkup.  We went through each sprinkler zone and identified several different problems.  Zone 2 had a cracked sprinkler pipe in a flower bed.  Zone 4 had a broken sprinkler rotor on the edge of the driveway that had been driven over and broken.  Zone 6 and 7 each had a couple of pop-up spray heads that were worn out and would not pop-up.  The diagnosis and the repair took less than two hours.  Now their  sprinkler system is running great!

Recently we fixed a sprinkler system that was poorly installed.

  The Sprinkler System Company that installed it didn’t know what they were doing.  There was no Master Valve installed in the Sprinkler System.  As a result, The Sprinkler Pipe between the water meter and the Sprinkler Valves stayed pressurized all the time.  This is bad during a cold snap in Oklahoma.  If a Master Valve and In-Line Pipe Drains had been installed originally, there would be no broken sprinkler pipes when it got too cold.    The Sprinkler Pipes would drain automatically.

Wow, we have a new twist on sprinkler repair.  Broken sprinkler pipes occur for all kinds of reasons.  Sprinkler Pipes break because:  1.  They freeze (usually due to poor installation)  2.  Cars or trucks drive up in yards and break them.  3.  They blow apart under pressure (usually because primer was not used when the pipes were glued together).

This year we have had a lot of calls to fix leaking or broken sprinkler pipes due to Earth Quake Damage.  I would expect that in California, but Oklahoma?  Since 1993 Oklahoma Drainage and Sprinkler Repair has fixed sprinkler systems for all kinds of reasons.  Earthquake damage is something new.

Since that time Oklahoma Drainage and Sprinkler Repair has successfully completed over 2000 drainage systems, and sprinkler repairs.

 


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Edmond Oklahoma Sprinkler Repair —  Do you have trouble with leaking Sprinkler Valves?  Are your Sprinkler Heads in the wrong place or are they spraying in the wrong direction?  Do you have an “Above Ground” Back-Flow Valve that is leaking after our last cold snap?  Oklahoma Drainage and Sprinkler Repair can help.  We provide solutions for all Residential Sprinkler System Problems.

Sprinkler System Repair  Broken Sprinkler Heads — Sprinkler Controllers — Sprinkler Valves — All Brands

Sprinkler RepairLeaking Sprinkler Pipes, Broken Sprinkler Heads, Back-Flow Valve Problems, Moving Sprinkler Heads, Adjusting Sprinkler Heads, Sprinkler Wire Problems, Controller Programming Trouble, Sprinkler Valve Problems.  We do it all.

Oklahoma Drainage and Sprinkler Repair provides Emergency Sprinkler Repair Service, After Hours and Weekends.  405 203 9419

Sprinkler Repair is an ongoing issue for any sprinkler system.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.    We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Broken Sprinkler Head took about an hour to fix.

Today we did a sprinkler repair in Norman.  The sprinkler system needed a checkup.  We went through each sprinkler zone and identified several different problems.  Zone 2 had a cracked sprinkler pipe in a flower bed.  Zone 4 had a broken sprinkler rotor on the edge of the driveway that had been driven over and broken.  Zone 6 and 7 each had a couple of pop-up spray heads that were worn out and would not pop-up.  The diagnosis and the repair took less than two hours.  Now their  sprinkler system is running great!

Recently we fixed a sprinkler system that was poorly installed.

  The Sprinkler System Company that installed it didn’t know what they were doing.  There was no Master Valve installed in the Sprinkler System.  As a result, The Sprinkler Pipe between the water meter and the Sprinkler Valves stayed pressurized all the time.  This is bad during a cold snap in Oklahoma.  If a Master Valve and In-Line Pipe Drains had been installed originally, there would be no broken sprinkler pipes when it got too cold.    The Sprinkler Pipes would drain automatically.

Wow, we have a new twist on sprinkler repair.  Broken sprinkler pipes occur for all kinds of reasons.  Sprinkler Pipes break because:  1.  They freeze (usually due to poor installation)  2.  Cars or trucks drive up in yards and break them.  3.  They blow apart under pressure (usually because primer was not used when the pipes were glued together).

This year we have had a lot of calls to fix leaking or broken sprinkler pipes due to Earth Quake Damage.  I would expect that in California, but Oklahoma?  Since 1993 Oklahoma Drainage and Sprinkler Repair has fixed sprinkler systems for all kinds of reasons.  Earthquake damage is something new.

Since that time Oklahoma Drainage and Sprinkler Repair has successfully completed over 2000 drainage systems, and sprinkler repairs.

 


Sprinkler RepairLeaking Sprinkler Pipes, Broken Sprinkler Heads, Back-Flow Valve Problems, Moving Sprinkler Heads, Adjusting Sprinkler Heads, Sprinkler Wire Problems, Controller Programming Trouble, Sprinkler Valve Problems.  We do it all.

Oklahoma Drainage and Sprinkler Repair provides Emergency Sprinkler Repair Service, After Hours and Weekends.  405 203 9419

Sprinkler Repair is an ongoing issue for any sprinkler system.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.    We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Broken Sprinkler Head took about an hour to fix.

Today we did a sprinkler repair in Norman.  The sprinkler system needed a checkup.  We went through each sprinkler zone and identified several different problems.  Zone 2 had a cracked sprinkler pipe in a flower bed.  Zone 4 had a broken sprinkler rotor on the edge of the driveway that had been driven over and broken.  Zone 6 and 7 each had a couple of pop-up spray heads that were worn out and would not pop-up.  The diagnosis and the repair took less than two hours.  Now their  sprinkler system is running great!

Recently we fixed a sprinkler system that was poorly installed.

  The Sprinkler System Company that installed it didn’t know what they were doing.  There was no Master Valve installed in the Sprinkler System.  As a result, The Sprinkler Pipe between the water meter and the Sprinkler Valves stayed pressurized all the time.  This is bad during a cold snap in Oklahoma.  If a Master Valve and In-Line Pipe Drains had been installed originally, there would be no broken sprinkler pipes when it got too cold.    The Sprinkler Pipes would drain automatically.

Fixing Leaking Sprinkler Pipes is a common occurrence for Oklahoma Drainage and Sprinkler Repair.  Most recently we had a service call in Lawton.  We got a call from a lady who had water pouring out from under the edge of her driveway.  After shutting off the water at the back-flow valve, we were able to determine that the leak definitely was coming from the sprinkler system.  A cracked sprinkler pipe was the problem and to make matters worse, the sprinkler pipe ran under the driveway.

Oklahoma Drainage and Sprinkler Repair had the solution.  Instead of trying to fix the broken sprinkler pipe, it was a much better idea to replace the entire pipe.  The Sprinkler Repair took about three hours.

 

Oklahoma Drainage and Sprinkler Repair has been solving all types of Sprinkler System Problems since 1993.

We provide:

1.  Sprinkler Valve Problems

2.  Sprinkler Wiring Problems

3.  Sprinkler Controller Problems / Sprinkler Clock Problems

4.  Sprinkler Head Problems

5.  Sprinkler Pipe Problems

6.  Sprinkler Coverage Problems

7.  Sprinkler Redesign Problems for new fences or swimming pools.

 

Many times sprinkler repair needs arise at inconvenient times. Water lines can break in the middle of the night.  Back-Flow Valves Freeze and break at night too.  Sometimes things go wrong when we are away from our homes as well.  Sprinkler Systems coming on at the scheduled times but not shutting off is common and has several possible causes.  Sprinkler Valves can “stick” open while running from lack of water pressure, or is not getting enough electrical current to shut it off from the sprinkler controller, or even a small piece of debris is stuck in the sprinkler valve and won’t allow the sprinkler valve to close.