Archive for the ‘Sprinkler Controller’ Category


Sprinkler Installation —  Typically Sprinkler Systems have two types of Sprinkler Heads.  You have Rotor Sprinkler Heads and Pop – Up Sprinkler Heads.

These two types of Sprinkler Heads should not be in the same Sprinkler Zone Together.  The reason is that they water at different rates.  The Pop-Up Sprinkler Head is a Continuous Spray Head.  It does not move or rotate.  It covers a small area and puts a lot of water down fast.  The Rotor Sprinkler Heads cover a much larger area and spray back and forth from left to right.  They take a greater amount of time to completely water their designed area.  If Pop-Ups and Rotor Sprinkler Heads are put in the same zone together and run at the same time, by the time the Rotor Sprinkler Heads are finished,  the area covered by the Pop-Up Sprinkler Heads will be Flooded.  This can kill whatever the Pop-Up Sprinkler Head is intended to water.

 

Many times ” Fly – By – Night Sprinkler Companies”  or, ” DIY Home owners who don’t know any better,” Put Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the same zone.

 

IT IS A BIG MISTAKE!

 

CMG Sprinklers and Drains Installs Sprinkler Systems, Drainage Systems ( French Drains, Surface Drains), and Provides Expert Sprinkler Repair.

 

Check out our Photos of French Drains,  Photos of Sprinkler Systems,  Photos of Sprinkler Repair, and Photos of Drainage Systems at out PhotoLibrary.

 

Customer Service Award Winner on Angie’s List

 


Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 


CMG Sprinklers and Drains — We have provided top quality Lawn Sprinkler Repair for 21 Years for all of Central Oklahoma.

 

If you have a Sprinkler Pipe Leaking , or a Sprinkler Zone not working correctly, give us a call.   If your Sprinkler Controller is on the fritz, or if you just have a broken Sprinkler Head get in contact with us.

 

If you have a Sprinkler System Question,  We will respond ASAP!     Email     cmgsprinklers@gmail.com

 

 

 


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair

CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

CMG Sprinklers and Drains –  Installing Lawn Sprinkler Systems in Central Oklahoma since 1993.  We service 100 miles in all directions from I35 – I40 interchange.  This Includes:  Oklahoma City, Yukon, Mustang, Blanchard, Chickasha, New Castle, Purcell, Norman, Moore, Edmond, Midwest City, Del City, and all surrounding areas.

Our Customers are Home Owners,  Business Owners, and Builders.  CMG Installs New Lawn Sprinkler System using Rain Bird Sprinkler System Parts.   Typically the Sprinkler System Controller is installed in the garage or on an outside wall.  Our Sprinkler Systems are FULLY AUTOMATIC AND SELF DRAINING.  NO WINTERIZATION IS NEEDED FOR OUR SPRINKLER SYSTEMS.  THE SPRINKLER SYSTEM IS TURNED TO THE ” OFF POSITION”, THE SPRINKLER PIPES THEN DRAIN AUTOMATICALLY.

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma
Sprinkler Controller with Rain/Freeze Sensor in Oklahoma
Sprinkler Systems designed by CMG are SELF DRAINING.  When the Sprinkler System is not running, the Sprinkler Pipes drain underground.  This ensures that the Sprinkler Pipes will not freeze in the winter.

CMG Designed Sprinkler Systems are also fully automatic.  Your Sprinkler System can run on its own any time you want, day that you want, or as long as you want.

CMG can also install a Rain/Freeze Sensor that will turn off your Sprinkler Systemif it is too wet or too cold to water and you are not available to turn off the sprinkler system.  ( If your on Vacation for example)  The Rain/Freeze Sensorwill also turn the Sprinkler System back on again when it gets dry enough or warm enough to water again.  PRETTY COOL!

Sprinkler Repair is a large part of our business.  Sprinkler Systems require maintenance and repair just like our homes or cars.  CMG Sprinklers and Drains has experience with virtually every Sprinkler Difficulty Possible.  General areas of Sprinkler Repair that we deal with are: (1.)  Broken Sprinkler Heads (2.)  Leaking Sprinkler Pipes (3.) Sprinkler Valve Problems (4.)  Back-Flow Valve problems (5.)  Sprinkler Clock/Controller problems


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair

CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

The title of this blog is, “Sprinkler Repair, Moore, Norman, Oklahoma City, Edmond.”

The term, “Sprinkler Repair,” Covers a lot of topics and areas of expertise.  CMG has been providing Expert Sprinkler Repair for all of Central Oklahoma since 1993.

Sprinkler heads most commonly require the most attention.  Sprinkler heads get broken for a variety of reasons, from dogs to cars to weed eaters.  Sprinkler heads typically break at the connection, between the Head and the Sprinkler pipe.   There are several ways that a sprinkler head might be connected to the sprinkler pipeCMG is familiar with all the possible Sprinkler Head Connections.    Many times a home owner may want a sprinkler head moved or adjusted to spray in a different area.  CMG can adjust or move all brands of sprinkler heads.

Sprinkler Valves many times need attention.  Sprinkler Valves Leak.  Sprinkler Valves Stick open.  Sometimes Sprinkler Valves quit working completely.  Once again, CMG can handle any problem you might have with sprinkler valves.

Sprinkler Valves need maintenance!

Sprinkler Valves need maintenance!

Sprinkler Controllers many times are the source of  Sprinkler Problems.  They can stop working, or may be difficult to program.  CMG can quickly diagnose your Sprinkler Controller Problem and recommend a solution.

Sprinkler Wiring running from the Sprinkler Controller to the Sprinkler Valves can be the cause of many Sprinkler Problems.

CMG Sprinklers and Drains can help with:

1.  Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3.  Leaking Sprinkler Pipes

4.  Shorted or disconnected Sprinkler Valve Wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

7. Sprinkler Head Adjustment

The Sprinkler System Problems listed above are the most common Sprinkler Problems that we deal with.

This concludes, “Sprinkler Repair, Moore, Norman, Oklahoma City, Edmond.”

CMG Sprinklers and Drains 405-226-0629

Check Out Our Other Sites!

cmgsprinklersanddrains.com

cmgsprinklersandrains.blogspot.com

btnbusinessblog.wordpress.com

activerain.com/blanecallen


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman
Trenching a Sprinkler System in Moore.

Trenching a Sprinkler System in Moore.

The Title of this blog is,” Sprinkler Repair, Drainage Systems, Norman, Edmond, Oklahoma City.”

If your yard is dry and dead a Lawn Sprinkler System Can jump-start your lawn for the fall growing season.  Our Sprinkler Systems are fully automatic and self-draining.  This is important because CMG Designed Sprinkler Systems are easy to use and the Sprinkler Pipes will never freeze in the Winter.  No Winterization is required.

Our Sprinkler Systems are Self-Draing. The Sprinkler Pipes Drain undergroundwhen the Irrigation System is turned off. Nothing needs to be done to prepare your Irrigation System for winter except turn it off.

Sprinklers at work.

Sprinklers at work.

For Central Oklahoma Residents who already have a Sprinkler System, I recommend a RAIN/FREEZ SENSOR.  This is a great way to ensure that the sprinkler system gets truned off when there is no one available to turn it off.  If you are away on vacation for example, the RAIN/FREEZE SENSOR will turn off the sprinkler system after a heavy thunderstorm when it is too wet to water.  The RAIN/FREEZE SENSOR  will turn the sprinkler system back on when it is dry enough to water again.  It will do the same thing for your sprinkler system it it gets too cold or starts to snow.

CMG Sprinklers and Drains can help if you need to re-design your Sprinkler System. If for example you are adding a swimming pool in your back yard, we can move the Sprinkler Heads and Sprinkler Pipes to fit the new dimensions of your yard. We can redesign or add-on to sprinkler systems where the home owners needs change.

Services provided by CMG carry a two-year warranty for parts and labor. This includes Sprinkler System Installation, Sprinkler Repair, and all Drainage Systems including French Drains, Surface Drains, and Channel Drains.

This concludes,Sprinkler Repair, Drainage Systems, Norman, Edmond, Oklahoma City.

CMG Sprinklers and Drains 405-226-0629

Check Out Our Other Sites!

cmgsprinklersanddrains.com

cmgsprinklersandrains.blogspot.com

btnbusinessblog.wordpress.com

activerain.com/blanecallen


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

The title of this blog is,”Sprinkler System Repair in Oklahoma City.”

This week CMG Sprinklers and Drains overhauled a flowerbed Sprinkler Zone in a Sprinkler System in East Norman.  The homeowner had an existing Sprinkler System that was in good shape for the most part, but had problems with the flowerbed Sprinkler Zone.  It had a Drip Sprinkler Zone installed.  The Drip Sprinkler System was installed correctly but was not practical for the flower bed.  The flowerbed was very sandy and could not retain water very well even with good mulch.  Plus the surrounding brick walls increased the amount of heat the plants had to endure in the summer.  The Drip Sprinkler Zone could not provide enough water fast enough for the plants.

CMG took out the Drip Sprinkler Zone and installed a Pop up Sprinkler Zone.  This allowed the homeowner to provide the necessary water to keep the plants alive in the Oklahoma Heat.

If your Lawn Sprinkler System is not working the way you want it too, give CMG Sprinklers and Drains a call.  405-226-0629

CMG provides expert Sprinkler System Repair for the following:

1.  Sprinkler Valve Problems

2.  Sprinkler Wiring Problems

3.  Sprinkler Controller Problems / Sprinkler Clock Problems

4.  Sprinkler Head Problems

5.  Sprinkler Pipe Problems

6.  Sprinkler Coverage Problems

7.  Sprinkler Redesign Problems for new fences or swimming pools.

CMG Services all of Central Oklahoma including:  Oklahoma City, Norman, Moore, Midwest City, Del City, Edmond, Mustang, Yukon, Blanchard, Newcastle, Purcell, and all surrounding areas.  405-226-0629  cmgsprinklers@hotmaill.com

This concludes, Sprinkler System Repair in Oklahoma City.”

CMG Sprinklers and Drains 405-226-0629

Check Out Our Other Sites!

cmgsprinklersanddrains.com

cmgsprinklersandrains.blogspot.com

btnbusinessblog.wordpress.com

activerain.com/blanecallen


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman
Our Sprinkler Systems are Self-Draing.   The Sprinkler Pipes Drain underground when the Irrigation System is turned off.   Nothing needs to be done to prepare your Irrigation System for winter except turn it off.  There is no water left in the Sprinkler Pipes to Freeze.

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We at CMG, take great pride in the Sprinkler Repair Services that we provide.  In almost 18 years of service, CMG has solved virtually every Sprinkler Repair Problem possible.  We solve Sprinkler Repair Problems that other companies can’t handle.

This week CMG completed a Sprinkler System, ” Pool-Makeover.”  This is a common situation.  When a home owner installs a new swimming pool, a back-hoe is used to dig the hole for the pool.  Typically the existing Sprinkler System ends up in a pile with several tons of dirt.

Unfortunately,  CMG Sprinklers and Drains was not the first choice for the home owner on the above mentioned, “Pool Makeover.”  The initial sprinkler company quit after two days.  They could not figure out which pipe went where, or what parts of the sprinkler system needed to be saved or replaced.

CMG was called to step in and handle the Extreme Sprinkler Repair.  It took us 4 days but we solved all the Sprinkler System ProblemsThe Sprinkler System now works, and the water coverage is better than before the pool installation.

If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call or send us an e-mail. 405 – 226-0629 cmgsprinklers@hotmail.com

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

The above are the most common problems that we deal with.

CMG Sprinklers and Drains can help if you need to re-design your sprinkler system. If for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard. We can redesign or add-on to sprinkler systems where the home owners needs change.

This concludes:


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

The title of this blog is, ” Installing Sprinklers Systems in Oklahoma City.”

CMG Sprinklers and Drains — In business since 1993.  Servicing all of central Oklahoma, Including: Oklahoma City, Norman, Moore, Edmond, Midwest City, Del City, Blanchard, Newcastle, Mustang, and Yukon.

Our most recent Sprinkler System Installation was in East Oklahoma City.  It was a Five Zone Sprinkler System.  The Sprinkler Heads were Rain Bird 5004s with Rainbird 4inch Popup Sprinkler Heads in the flower beds.  The Controller was a Hydro-Rain Sprinkler Controller with a Rain-Freeze Sensor attached.  The Sprinkler System Installation took two days.

Sprinkler System at work

Sprinkler System at work

CMG Sprinkler and Drain   — CMG has installed Lawn Sprinklers in Edmond and all of Central Oklahoma since 1993.  Typically we install Rain Bird Lawn Irrigation Systems but will install all other major brands at customers request.

Recently we installed a seven zone Rain Bird Sprinkler System near Penn and 172 nd  st.   We installed Rain Bird 5004 model Sprinkler Heads along with a Rain- Freeze Sensor.

The Lawn Irrigation System took two days to install.    More fun in the sun on a hot day.

If you are tired of dragging hoses around trying to keep your yard alive, consider a Lawn Sprinkler System Designed by CMG.

We service all of Central Oklahoma including: Edmond, Norman, Moore, Yukon, Mustang, Newcastle, Del City, Midwest City, Oklahoma City, Purcell, and Blanchard.

We also Specialize in French Drains and Surface Drains and all types of Drainage Systems.  If you need a channel drain installed across a sidewalk or a metal grate put in a driveway, Give us a call.

405-226-0629

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler SystemsRepairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Please leave a comment at the bottom if you like.

Blane Callen

CMG  recommends The, “Perfectbore Company,” for all your Directional Drilling needs.   Founded by Carl Nida and servicing the entire state of Oklahoma.

If you need PVC Pipe or Electrical Conduit installed in tough, hard-to-get places, Give Perfectbore a call.  Perfect Bore installs: Drain pipe,  PVC Pipe or Conduit under sidewalks, driveways, roads, parking lots.  If you need Precision Directional Boring give them a call.

Directional Drilling is designed to get pipes or conduit into places that you can’t get to with a shovel or a trencher.

Other wise known as precision Directional Boring, Directional Drilling can save time and money.  405-816-6551  perfectbore@cox.net

Directional Drilling
Directional Drilling to install Sleeves
Directional Drilling to install Water Services
Directional Drilling to install Electrical Conduit
Directional Drilling to install Drain Pipe
This Concludes,”Installing Sprinklers Systems in Oklahoma City.”
CMG Sprinklers and Drains 405-226-0629Check Out Our Other Sites!

cmgsprinklersanddrains.com

cmgsprinklersandrains.blogspot.com

btnbusinessblog.wordpress.com

activerain.com/blanecallen

blanecallen.wordpress.com


Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

The title of this blog is, “Sprinkler Repair in Oklahoma City, Norman, Edmond, Blanchard, Mustang, Moore.”

Today we got a call from a homeowner who had broken sprinkler pipes and a damaged Sprinkler Valve.  He hired a contractor to widen his driveway.  When the construction started, sprinkler pipes that ran along the driveway were broken and a Sprinkler Valve was completely ripped up.  Water was shooting everywhere.  They turned off the water at the meter and called us.  We came out and caped the broken sprinkler pipes and scheduled a time to come back out and put the Sprinkler System back together once the concrete work was complete.

Lawn Sprinkler Systems developed problems and need maintenance from time to time.  CMG can help with small sprinkler problems such as a broken sprinkler head or a sprinkler controller programming problem.  We also deal with larger sprinkler problems like redesigning sprinkler zones or replacing sprinkler valvesCMG also does sprinkler systems checkups to test your irrigation system for possible problems that you may not be aware of.

Replacing Broken Sprinkler Valve in Moore.

Replacing Broken Sprinkler Valve in Moore.

CMG Sprinklers and Drains can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking Sprinkler Pipes

4.  Shorted or disconnected Sprinkler Valve Wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

7.  Sprinkler Head Adjustment

The Sprinkler System Problems listed above are the most common Sprinkler Problems that we deal with.

CMG Sprinklers and Drains can help if you need to re-design your Sprinkler System.  If for example you are adding a swimming pool in your back yard, we can move the Sprinkler Heads and Sprinkler Pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

If you have questions concerning sprinkler systems or drainage systems please send us an e-mail atcmgsprinklers@hotmail.com

CMG Sprinkler and Drain also installs New Lawn Irrigation Systems.  Since 1993 we have installed Sprinkler Systems in: Oklahoma City, Norman, Edmond, Midwest City, Del City, Moore, Yukon, Mustang, Purcell, Newcastle, and surrounding Central Oklahoma.  Our sprinkler systems carry a 2year warranty for all parts and labor.

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler SystemsRepairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

CMG Sprinklers and Drains 405-226-0629

Check Out Our Other Sites!

cmgsprinklersanddrains.com

cmgsprinklersandrains.blogspot.com

btnbusinessblog.wordpress.com

activerain.com/blanecallen

blanecallen.wordpress.com

 

Please leave a comment at the bottom if you like.

Blane Callen

  This concludes, “Sprinkler Repair in Oklahoma City, Norman, Edmond, Blanchard, Mustang, Moore.”