Archive for the ‘French Drain Photos’ Category


A “French Drain” Moves “surface water” away from a low lying problem drainage area. What flows over the ground.  Sub surface water  which runs underground  is not considered  when a drainage system is being installed.  People only think about what they can see and don’t think much about what they can’t see.

channel drain driveway
Channel Drain set in Driveway is one type of Surface Drain

Sub Surface water is water that is underground and saturated in the soil.  Just like water above ground (Surface Water) moves.  Water under ground moves too and is a very big part of any drainage problem.

Water flows over the surface into the area that floods and is a problem.  A big mistake that is made be the casual eye, is that all the water in a swampy problem area got there by running over the surface.  Yes, it probably did, but it also got there by moving there underground as well.  This is called SUB SURFACE WATER MOVEMENT, and it is important to any kind of Drainage System that might be installed.

If your problem water is partially Sub-Surface water, and you install a Drainage System that uses Surface Drains only, then you just wasted a lot of money!

Surface Drain install
Surface Drain Installed by sidewalk

Water can only be drained away that is on the surface.  It goes into the top of the Drain on the Surface.  It’s Name is ” A Surface Drain.”  It Drains Surface Water ONLY!

A French Drain can drain Surface water and Sub Surface water both.  It water is in the problem area by means of Sub – Surface movement, then it will enter the French Drain Laterally, under ground,  and be drained away along with the surface water.

New French Drain
French Drain with very little fall

When Installing a Drainage System, What kind of Drain Pipe do you use and what size Drain Pipe Do you need?

For a Drainage System you have 3 Choices of Drain Pipe.  You can use ADS,  Or Sewer and Drain, or Thick Walled Pvc Pipe.

ADS is Black and Flexible.  It is used in a majority of Drainage Systems.  It works well and is the easiest to install.

 

connecting down spout

Connecting Gutter Down Spout to French Drain Under Sidewalk

Covering

Covering ADS Drain Pipe

ADS is available in 3 inch , 4 inch, and 6 inch for residential and small business Drainage Applications.

Sewer and Drain Pipe is white, green, or grey and is thin walled.  It is used for cheap plumbing applications such as sewer lines.  It is also used for inexpensive Drainage Systems.  A Drainage System using Sewer and Drain Pipe is slightly cheaper than ADS.   It is rigid and harder to install than ADS. It takes more time to install and more digging is required at the joints or connections.  It is very difficult attaching a rigid Drain Pipe to a Curb outlet because the Pipe does not flex at the connection.  The pipe hits the curb outlet at a downward angle and does line up straight with the connection.  Many Drain Installation Companies use a piece of ADS on the end of the Sewer and Drain pipe and then connect it to the curb outlet.  Many times there is no other way to connect them depending on your downward slope.

 

Sewer and Drain

Green or White Sewer and Drain Pipe

Sewer and Drain is brittle after a short amount of time.  You can break it with a hammer.   Tree roots, many times squeeze the pipe and crack it causing it to leak.   It is not a good long term solution for anything.

Old Sewer and Drain Pipe

Old Sewer and Drain Pipe

Thick walled PVC is superior to ADS and Sewer and Drain.  It will last a lifetime.  It won’t crack under normal circumstances.

That being said, It is The most difficult of all to install.  It is not for weekend warriors or your brother-in-law who says he knows what he is doing.  Someone with a lot of experience is needed to install a Thick Walled PVC Drainage System.

SD and 40 schedule

40 Schedule PVC Drain Pipe on the right, Sewer and Drain on the left.

Oh, by the way, 40 Schedule or 200 Class PVC is by far the most expensive.

If money is no object, then absolutely hire an Expert to install a Thick walled PVC System.

There are two types of Thick Walled Pvc Pipe available for Drainage Systems, 40 Schedule and 200 class.

Forty Schedule is always the same thickness at a particular size pipe.

Two Hundred Class gets thicker as the pipe gets bigger.

Forty Schedule is thicker in pipes smaller than 2 inch.

Two hundred Class is thicker in pipes over 2 inch.

Typically 4 inch pipe is most commonly used in a Drainage Systems.  Forty Schedule and 200 Class are both very good in the 4 inch Size.

 

The size of Drain Pipe you use in your Drainage System is fairly simple.  You can use 3 Inch, 4 Inch, or 6 Inch.  Sometimes 2 inch can be used on a small single drain but it is easily overwhelmed by too much water.

Four Inch, as stated earlier is the most common size used in a Drainage System.

If your system is a Drainage System and not a Flood Prevention System, then 4 Inch Should be fine for most applications.

If your drainage system must handle a lot of water in a hurry and is designed intercept water to protect property then two 4 inch pipes may be needed or one 6 inch Pipe.  It can vary.

In 2015 we installed a Flood Prevention System that had two 6 inch pipes in the same trench.  Our customer never had water in her garage again.

If you can afford larger Drain Pipe or more than one Drain Pipe in the same trench, your Drainage System should do its job well.

If you connect 5 large Surface Drains to one small 3 inch pipe, be prepared for poor performance.  I’ve seen a large French Drain connected to a 3 inch pipe.  The water shot out of the exit point like a cannon and the problem drainage area stayed flooded for a long time.

I try not to use 3 inch at all for a Drainage System and I am very careful not to attach too large or too many drains to 4 inch.

Gutter to French Drain
Connecting Gutter to French Drain

Surface Drains look nice but they have limited applications.  They must be installed in situations that they are designed for.  Surface Water only in smaller volume applications.  Surface Drains don’t move as much water as French Drains.


 

muddy french drain installation

Installing a French Drain in the mud

Standing water can cause a lot of damage to your yard.  The above picture was from a French Drain Installation in Oklahoma City.

Many times we wait until things dry out a bit before beginning a French Drain Installation.  Some times the water never goes away.  So we start digging in standing water and putting the mud in a wheelbarrow.   We then haul it to a dump trailer to be hauled away.  It isn’t the easiest thing to do.

 

Liner and French dran

Perforated Pipe, Filter , and Liner installed in a drainage trench.

The water started draining away as soon as we dug the Drainage Trench.  Once the Pipe and Limestone were installed, it drained away even faster.

The trench liner allows sub surface water to pass through it and reach the French Drain Pipe.  The reason it is installed is to maintain the integrity of the drainage trench so it doesn’t collapse over time.  It also helps protect the pipe from filling up with mud or sand, clogging the French Drain.

Below is a picture of a French Drain that we had to take out and replace because it had no liner or filter around the Pipe.

clogged French Drain Pipe

result of French Drain Installed Incorrectly

 

 

Installing concrete channel drain

Setting the concrete around the channel drain

The French Drain Pipe shown above has a neo Preen soc around it to prevent sand and debris from clogging the French Drain.  The next step is to add the lime stone on top.

Other types of stone can be used as well.

colored gravel french drain

French Drain with colored gravel.’

 

FD River roc

A French Drain with River Rock

The type of rock that covers a perforated French Drain Pipe can be just about any type of quality gravel or crushed stone.  Very small crushed stone or sand is not a good idea, however.  The water must be able to flow through the stone to reach the perforated pipe.

Gutter to French Drain
Connecting Gutter to French Drain
French Drain with stepping stones
French Drain with stepping stones

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

6 Inch French Drain
6 Inch French Drain

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, Oklahoma Drainage specializes in just that!4 Inch Drain Pipe Ready to be covered with dirt in Norman.


Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

Drainage Trench

Trench For French Drain

Just what is a “French Drain?” Many times people incorrectly

French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

 
 

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

 

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

French Drain with Colored Gravel

 
 

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Drain Pipe for French Drain running under sidewalk

French Drain Pipe under sidewalk

SPRINKLER REPAIRDRAINAGE SYSTEMS FRENCH DRAINSPRINKLER ADJUSTMENTSURFACE DRAIN EMERGENCY SPRINKLER REPAIR

 

.

French Drain with stepping stones

French Drain with stepping stones

 

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

 

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give CMG a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, CMG specializes in just that!

 

 

 

If you have water standing in your backyard.  If you have water standing on your driveway.  If water is leaking into your air conditioning vents.  We can help with all these problems and many more.

Oklahoma Drainage and Sprinkler Repair installs French Drains, Surface Drains, Channel Drains and Sump Pumps.

If you have water in the wrong place, call us for a free Estimate.

Gutter to French Drain
Connecting Gutter to French Drain
Installed French Drain
French Drain Installed, Water is gone, just need to clean the mud off the sidewalk
Drainage System Installation, Gutter Down Spouts Connected.
Drainage System Installation, Gutter Down Spouts Connected.

A Drainage System can protect your property from standing water.


French Drains, French Drains, French Drains,  Yes we install French Drains!

Oklahoma Drainage and Sprinkler Repair Servicing Central and Western Oklahoma since 1993. 

We also Install Surface Drains, which make up 6 inch, 9 inch and 12 inch basins. 

We install Channel Drains Across Driveways and Sidewalks.

We Install Sump Pumps to solve difficult drainage issues as well.

Harsh weather in Oklahoma seems to becoming more common.  In 2013,  Norman Oklahoma had 4 inches of rain in two hours.  That’s the most rain in a short time that I can remember.  Storm-Water runoff can cause damage to all types of property and buildings.  Water getting inside your house is never a good thing.  A Drainage System that utilizes a French Drain can help.

Drains can protect your home and property from water damage.  Oklahoma Drainage install a wide variety of Drains in many different places.  A Drain or Group of Drains with Drain Pipe going to an exit point is a “Drainage System.”

A “French Drain” Moves “surface water” away from a low lying problem drainage area.  Sub surface water is many times not considered or thought about when a drainage system is being installed.  People only think about what they can see and don’t think much about what they can’t see.

Sub Surface water is water that is underground and saturated in the soil.  Just like water above ground (Surface Water) moves.  Water under ground moves too and is a very big part of any drainage problem.

Water flows over the surface into the area that floods and is a problem.  A big mistake that is made be the casual eye, is that all the water in a swampy problem area got there by running over the surface.  Yes, it probably did, but it also got there by moving there underground as well.  This is called SUB SURFACE WATER MOVEMENT, and it is important to any kind of Drainage System that might be installed.

If your problem water is partially Sub-Surface water, and you install a Drainage System that uses Surface Drains only, then you just wasted a lot of money!

Surface Drain install
Surface Drain Installed by sidewalk

Water can only be drained away that is on the surface.  It goes into the top of the Drain on the Surface.  It’s Name is ” A Surface Drain.”  It Drains Surface Water ONLY!

A French Drain can drain Surface water and Sub Surface water both.  It water is in the problem area by means of Sub – Surface movement, then it will enter the French Drain Laterally, under ground,  and be drained away along with the surface water.

New French Drain
French Drain with very little fall

Surface Drains look nice but they have limited applications.  They must be installed in situations that they are designed for.  Surface Water only in smaller volume applications.  Surface Drains don’t move as much water as French DrainLarge 6 Inch French Drain Installed in Norman

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.Surface Drain Installed next to sidewalk in Oklahoma City.

2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A Surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the Drain Pipe that is connected to the Drain.Surface Drain Installation in Norman

Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows down hill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drain Pipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains

3 inch, 4 inch, and 6 inch Drain Pipes

3 inch, 4 inch, and 6 inch French Drains

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.Cutting The Curb and Installing Curb Fitting for French Drain

The Drainage Pop-Up Emitter is connected to the end of a Drain Pipe.  It is downhill from a French Drain or a Surface Drain.  It is a small release basin with a green pop-up lid.  When releasing water, it pops up about an inch to release the water from the French Drain or Surface Drain.  When the Storm Water has moved through the Drainage System and out of the Pop-Up Emitter, the green lid closes back to its original closed position.  The emitter is designed to release water out into a yard or down a hill or other desirable Drainage Exit Point where there is no curb.Popup Emitter to release water from a Drainage System in Yukon.


French Drains Surface DrainsSump Pumps

Oklahoma Drainage and Sprinkler Repair

muddy french drain installation
Installing a French Drain in the mud
Installed French Drain

French Drain Installed, Water is gone, just need to clean the mud off the sidewalk

Standing water can cause a lot of damage to your yard.  The above picture was from a French Drain Installation in Oklahoma City.

Many times we wait until things dry out a bit before beginning a French Drain Installation.  Some times the water never goes away.  So we start digging in standing water and putting the mud in a wheelbarrow.   We then haul it to a dump trailer to be hauled away.  It isn’t the easiest thing to do.

Liner and French dran
Perforated Pipe, Filter , and Liner installed in a drainage trench.
New French Drain

French Drain Dries out the whole area

The water started draining away as soon as we dug the Drainage Trench.  Once the Pipe and Limestone were installed, it drained away even faster.

The trench liner allows sub surface water to pass through it and reach the French Drain Pipe.  The reason it is installed is to maintain the integrity of the drainage trench so it doesn’t collapse over time.  It also helps protect the pipe from filling up with mud or sand, clogging the French Drain.

Below is a picture of a French Drain that we had to take out and replace because it had no liner or filter around the Pipe.

clogged French Drain Pipe
result of French Drain Installed Incorrectly
new french drain
French Drain Installation
Installing concrete channel drain
Setting the concrete around the channel drain

The French Drain Pipe shown above has a neo Preen soc around it to prevent sand and debris from clogging the French Drain.  The next step is to add the lime stone on top.

french drain near a fence
French Drain Installed in Edmond

Other types of stone can be used as well.

colored gravel french drain
French Drain with colored gravel.’

French Drain 

Drainage System Installation is a big part of our business.  If you have trouble with standing water after a thunderstorm, or if your sidewalk turns into a moat every time it rains, or worst of all you have water seeping into your home, Give us a call.  We can quickly diagnose your Drainage problems and design a Drainage System to solve your Drainage Problems. WE  utilize,  French Drains, Surface Drains, Channel Drains, Basement Drains, Trench Drains, Basin Drains, and Sump Pumps.Keep water off your driveway with a channel drain 

This year Oklahoma Drainage and Sprinkler Repair has addressed many standing water problems and drainage issues for residents and business owners of Oklahoma.  On one occasion, we installed a Surface Drain in the middle of a driveway.  After a rain, water was standing in front of the garage and would flow under the door when it got too deep.  We cut the driveway, Installed the Surface Drain, and replaced the cement.  Problem Solved.

Another Drainage Problem involved installing a Sump Pump in a basement floor.  The basement would flood after a hard rain.  Again, Problem solved!

Harsh weather in Oklahoma seems to becoming more common.  In 2013,  Norman Oklahoma had 4 inches of rain in two hours.  That’s the most rain in a short time that I can remember.  Storm-Water runoff can cause damage to all types of property and buildings.  Water getting inside your house is never a good thing.  A Drainage System that utilizes a French Drain can help.

Drains can protect your home and property from water damage.  Oklahoma Drainage and Sprinkler Repair installs a wide variety of Drains in many different places.  A Drain or Group of Drains with Drain Pipe going to an exit point is a “Drainage System.”


French Drain

In the past 27  years, Oklahoma Drainage  has designed and installed a large number of Drainage Systems.  For the most part, we have utilized French Drains and Surface Drains of many different shapes and sizes.  In two decades we have built up a high level of experience diagnosing Drainage Problems.  We know what to look for, what to expect, and how to approach a wide variety of situations where water is in a harmful or undesirable place.

Installing French Drain and Curb Outlet in Drainage System in Norman.

6 Inch French drain
French Drain in Flood area

Oklahoma Drainage and Sprinkler Repair installs many types of Drains in a wide variety of places.  Here are a few of them. French Drain Installation along foundations near wallsFrench Drain Installation behind retaining walls – French Drain Installation in and around flower beds – French Drain Installation in basements – French Drain Installation near sidewalks and along driveways – French Drain Installation under pool decks and around swimming pools – French Drain Installation on hillsides and on slopes to protect building and homes – Surface Drain Installation in sidewalks set in concrete – Surface Drain Installation in driveway set in concrete – Surface Drain Installation on side of house to catch water from gutter downspout – Surface Drain Installation in basement with Sump Pump inside to pump out the water – Surface Drain Installation in low spot in yard to handle a moderate amount of water – Surface Drain Installation next to driveway to catch water run-off – Surface Drain Installation next to sidewalk to catch water run-off – Surface Drain Installation connected to gutter down-spout – Just what is a “French Drain?”  Many times people incorrectly use the phrase, “French Drain,”  to apply to many different types of Drains  that could be used in a Drainage System.   The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.” A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drain Pipe is connected underground to an outlet on the Drain Basin. Storm-Water Drains through the grate into the Drain Basin.  Once in the Drain Basin, water travels out of the basin through a Drain Pipe.  The Storm-Water continues downhill in an underground Drain Pipe to an exit point. A Surface Drain may come in many different shapes or sizes.  It is a Drain Basin with a Drain Grate on top and a Drain Pipe connected on the side.  The Drain Grate may be round or square.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.Channel Drain installed in a sidewalk by a front door.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it. The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the drain .DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A L


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

channel drain driveway
Channel Drain set in Driveway

FRENCH DRAIN IN EDMOND OKLAHOMA, 

Surface Drain set in concrete

Drainage System Trench

Drainage System Trench

Oklahoma Drainage and Sprinkler RepairFrench Drain Installation, Drainage System Design, Expert Lawn Sprinkler RepairDrain Repair 

Recently Oklahoma Drainage and Sprinkler Repair installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spoutsinto the French Drain.

Channel Drain in Oklahoma City
Channel Drain in Oklahoma City
Setting in the channel drain
Setting in the Channel Drain in the cut.
Curb Outlet for French Drain in Edmond
Curb Outlet for French Drain in Edmond

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

driveway channel drain
Driveway Channel Drain Installation

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

river rock french drain install
A French Drain Can Handle Standing Water

FRENCH DRAIN IN EDMOND OKLAHOMA, DRAINAGE CONTRACTOR

Oklahoma Drainage and Sprinkler Repair Recently installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain

We solve residential and commercial drainage problems.
We Install lawn Sprinkler Systems.
We repair and redesign Sprinkler Systems.

After a thunder storm, do you have water standing on your driveway, sidewalk, on the side of your house, backyard, front yard, or worst of all — seeping into your home? We can help! We can diagnose your problem and design a drainage system specifically for your needs. We install: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, Basement Drains, and Sump Pumps.


Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Oklahoma Drainage and Sprinkler Repair Installs Surface Drains and French Drains.  Some times it is up hill in all directions from the Problem Drainage Area.  This problem can be solved by installing a Sump Pump.  When the cavity fills, the water is pumped away to the point where the water exits the drain which can be a curb outlet or a pop-up emitter.

Sump Pump Installation
Sump Pump Installation

 

new curb outlet

Curb outlet with more than 6 inches of fall

French Drain Running Through Low Areas

French Drain with stepping stones

WHAT SIZE DRAIN PIPE FOR FRENCH DRAINS?

French Drains can be decorated with many types of stone
French Drains can be decorated with many types of stone

French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

French Drain in flowerbed
French Drain in flowerbed

For Small business and Residential French Drains, Four inch ADS Perf/Soc French Drain pipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3 inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutter down spouts connected directly into the French Drain, For Example)  Three Inch French Drain Pipe should be avoided if possible.

Six inch  ADS Perf/Soc French Drain Pipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

Installing Gravel on top of a 6 inch French Drain
Installing Gravel on top of a 6 inch French Drain

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

decorative french drain

French Drains can be decorated with many types of stone

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

 

A French Drain Can Handle Standing Water

 

Oklahoma Drainage and Sprinkler Repair Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

 

 

 

Oklahoma Drainage and Sprinkler Repair Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

French Drain Installed in Yukon

Once the Sprinkler System had been redesigned and the gutters had been connected, we ran the 6 inch Drain Pipe from the end of the French Drain, around the house to release through the curb.  We cut the curb and installed a 6 inch curb fitting with acrylic concrete.  A few days later a major thunderstorm poured down on the property.  The French Drain and the Drainage System Worked Perfectly. This week we installed a 6 Inch French Drain in Oklahoma City.  Water was running down the hill, under the back fence, into the back yard, across the sidewalk, and into the side door going into the garage.  After every heavy rain, water was getting into the garage.  We installed a 6 Inch French Drain across the back yard to divert the water.  We also connected the Gutter Down Spouts Directly into the French Drain.  Once the French Drain was down hill from the house, we changed from French Drain Pipe to solid 6 inch ADS Drain Pipe and continued across the front yard to the street.  Once at the curb, we cut the curb with a concrete saw and installed a Curb Outlet for the French Drain.  Problem solved!

drain install

Installing French Drain in standing water

Something to think about — Most people see and deal with what is obvious when it comes to Drainage Problems.  Surface Water is “Obvious”!  People see it washing over the surface into the area that collects the water.  Simple enough.

A good place for a French Drain

Water Standing in your yard can be tricky. Designing a Drainage System to intercept the Surface Water is the first step, but many times is not the only step.  Often Sub-Surface Water( Water Running Under Ground ) is not accounted for by people with less experience in designing Drainage Systems.  They install A Drainage System that uses Surface Drains to Intercept the running surface water.  Sometimes that works if that is the only water source to the Problem Drainage Area. Surface Drains drain surface water away only.  Sub Surface water runs right around them and into the same Problem Drainage Area.  There may be less water there than there was before but the problem still remains. A French Drain is the solution when water is running into a problem area over the surface and under ground.  A French Drain solves both problems and the area will be dry.

cnannel drain location

Water standing on Driveway, a channel drain is needed.

cutting concrete for channel drain

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.

Installing Channel Drain Across Sidewalk in Norman
Installing Channel Drain Across Sidewalk in Norman

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.


Oklahoma Drainage and Sprinkler Repair Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

French Drain Installed in Yukon

Once the Sprinkler System had been redesigned and the gutters had been connected, we ran the 6 inch Drain Pipe from the end of the French Drain, around the house to release through the curb.  We cut the curb and installed a 6 inch curb fitting with acrylic concrete.  A few days later a major thunderstorm poured down on the property.  The French Drain and the Drainage System Worked Perfectly.

This week we installed a 6 Inch French Drain in Oklahoma City.  Water was running down the hill, under the back fence, into the back yard, across the sidewalk, and into the side door going into the garage.  After every heavy rain, water was getting into the garage.  We installed a 6 Inch French Drain across the back yard to divert the water.  We also connected the Gutter Down Spouts Directly into the French Drain.  Once the French Drain was down hill from the house, we changed from French Drain Pipe to solid 6 inch ADS Drain Pipe and continued across the front yard to the street.  Once at the curb, we cut the curb with a concrete saw and installed a Curb Outlet for the French Drain.  Problem solved!

drain install

Installing French Drain in standing water

Something to think about — Most people see and deal with what is obvious when it comes to Drainage Problems.  Surface Water is “Obvious”!  People see it washing over the surface into the area that collects the water.  Simple enough.

A good place for a French Drain

Water Standing in your yard can be tricky.

Designing a Drainage System to intercept the Surface Water is the first step, but many times is not the only step.  Often Sub-Surface Water( Water Running Under Ground ) is not accounted for by people with less experience in designing Drainage Systems.  They install A Drainage System that uses Surface Drains to Intercept the running surface water.  Sometimes that works if that is the only water source to the Problem Drainage Area.

Surface Drains drain surface water away only.  Sub Surface water runs right around them and into the same Problem Drainage Area.  There may be less water there than there was before but the problem still remains.

A French Drain is the solution when water is running into a problem area over the surface and under ground.  A French Drain solves both problems and the area will be dry.

 

cnannel drain location

Water standing on Driveway, a channel drain is needed.

cutting concrete for channel drain

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.

Installing Channel Drain Across Sidewalk in Norman
Installing Channel Drain Across Sidewalk in Norman

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

Surface Drain Installation in Edmond
Surface Drain Installation

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

6 Inch French Drain
6 Inch French Drain
French Drain with stepping stones
French Drain with stepping stones

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

Drainage System Installation is a big part of our business in Central Oklahoma.  We help people with Drainage Problems in and around their home or business.  If your sidewalk turns into a moat after a hard rain, or if your back yard floods after a thunderstorm, give usa call.  Standing water can damage cement and concrete in sidewalks, driveways, and foundations.  We can quickly diagnose your Drainage Problems and design a drainage system to fit your needs. We utilize:  French Drains, Surface Drains, Channel Drains, Basin Drains, Basement Drains, Trench Drains, and Sump Pumps.  We install a variety of drains to solve a variety of problems.

4 Inch Drain Pipe Ready to be covered with dirt in Norman.
Drain Install

4 Inch Drain Pipe Ready to be covered with dirt in Norman.