Archive for the ‘Edmond Oklahoma French Drain’ Category


Drainage System Installation in Norman

Hard rain and Flooding is becoming more common.

Protect your home or business with a French Drain or Drainage System From Oklahoma Drainage and Sprinkler Repair.

  Drainage System Installation is becoming one of the areas of business for us.  In 26 years we have become more accomplished at solving  Drainage Problems for our customers.  Water can cause damage in all kinds of places.  A Drainage System, simply put, is a Drain with a Drain  Pipe leading underground to an exit point.

A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation.  We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it.

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

 

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.   With over 25 years of experience we provide top quality French Drains, Drainage Systems, and Sprinkler Repair.

 

French Drain in Oklahoma City

 

We Service all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.  Now we provide service to Lawton and Altus as well.

 

Water can cause damage in all kinds of places.  A Drainage System, simply put, is a Drain with a Drain  Pipe leading underground to an exit point.  Most Drainage Systems utilize a French Drain or a Surface Drain, or both.

Oklahoma Drainage and Sprinkler Repair provides Drainage Diagnostics  .  A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation.  We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it.  French Drains and Surface Drains are used to make up the Drainage System.

Typically many things must be considered when completing a Drainage Diagnostic.

1.  Identify the areas being damaged by water and determine if there are any hidden areas.

2.  Identify the sources of water causing the damage.  Most Drainage Problems have more than one source.  A water source can fall from the sky as rain, or can flow down the hill as storm-water runoff, or can flow from a gutter down-spout (yours or your neighbor’s),  or flow under ground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street.  (These are the most common)

3.  Identify the Exit Point by determining where we want to take the unwanted water.

4.  Determine what type of Drains can best solve the Drainage Problem.  We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.

5.  Determine what type and size of Drain Pipe is needed to accommodate the volume of water to be drained.  Larger is always better!  Big Drains with Small Drain Pipes never works!

If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give CMG a Call!  TYPICALLY A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!

 

Typically many things must be considered when completing a Drainage Diagnostic.

1.  Identify the areas being damaged by water and determine if there are any hidden areas.

2.  Identify the sources of water causing the damage.  Most Drainage Problems have more than one source.  A water source can fall from the sky as rain, or can flow down the hill as storm-water runoff, or can flow from a gutter down-spout (yours or your neighbor’s),  or flow under ground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street.  (These are the most common)

3.  Identify the Exit Point by determining where we want to take the unwanted water.

4.  Determine what type of Drains can best solve the Drainage Problem.  We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.

5.  Determine what type and size of Drain Pipe is needed to accommodate the volume of water to be drained.  Larger is always better!  Big Drains with Small Drain Pipes never works!

If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give Us a Call!  TYPICALLY A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!


Oklahoma Drainage and Sprinkler Repair – 405 203-9419

Have you ever had water sanding on your Driveway?  Water on Driveways can cause cement or asphalt to break down and come apart resulting in cracks and deterioration.  Not to mention getting out of your car and stepping into water is never pleasant!

Surface Drain installed in Driveway with Metal Grate.

Oklahoma Drainage and Sprinkler Repair can help by installing a surface drain in your driveway or sidewalk.  If you live in Edmond and need help, give us a call.  We service all of Central and Western Oklahoma.

We install all types of Residential Drains including : French Drains, Surface Drains, and Channel Drains.

Installing Channel Drain Across Sidewalk in Norman

 

These folks had water standing right at there front door.  Installing a Channel Drain solved the problem.


Today we are installing a French Drain system for a customer in East Norman.  She has water running into her front door through her flower bed.  The bed acts like a pond and over-spills onto her front porch and then through her front door.  To solve the problem, we are installing a French Drain running across her flower bed and under her sidewalk.  Once under the sidewalk the French Drain will connect to Solid Drain Pipe and continue on down the hill to the exit point where we will install a pop-up emitter.  There are two gutter downspouts that will be connected into the French Drain System along the way.

French Drain with colored river rock along foundation

French Drain in flower bed

 

 Do you have water standing in the wrong place after a hard rain?  Does your sidewalk turn into a moat after a storm? Or does your back yard flood from run-off from your neighbor’s roof? If so, give Oklahoma Drainage and Sprinkler Repair a call. WE can quickly diagnose your Drainage Problems and provide a solution.  With over 20 years experience, we can handle all your residential or commercial drain issues.

Installing Drain Pipe from French Drain in Back Yard

Installing Drain Pipe from French Drain in Back Yard

 

 


Oklahoma Drainage and Sprinkler Repair – 405 203 9419

We have been solving Drainage Problems since 1993.  We utilize French Drains, Surface Drains, Channel Drains, and even Sump Pumps in our Drainage Systems.

If you have water standing in a bad place, such as a Flower Bed, Basement, Driveway, Sidewalk, or Yard, We can help

 

Today we are installing a French Drain system for a customer in East Norman.  She has water running into her front door through her flower bed.  The bed acts like a pond and over-spills onto her front porch and then through her front door.  To solve the problem, we are installing a French Drain running across her flower bed and under her sidewalk.  Once under the sidewalk the French Drain will connect to Solid Drain Pipe and continue on down the hill to the exit point where we will install a pop-up emitter.  There are two gutter downspouts that will be connected into the French Drain System along the way.

 

French Drain with colored river rock along foundation

French Drain with colored river rock along foundation

 

French Drain Pipe running to curb outlet in Oklahoma City.

French Drain Pipe running to curb outlet in Oklahoma City.

 

 


French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

For Small business and Residential French Drains, Four inch ADS Perf/Soc French Drain pipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3 inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutter down spouts connected directly into the French Drain, For Example)  Three Inch French Drain Pipe should be avoided if possible.

Six inch  ADS Perf/Soc French Drain Pipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

Installing Gravel on top of a 6 inch French Drain

Installing Gravel on top of a 6 inch French Drain

The Drawbacks to 6 inch French Drain installation are:  1.  The Materials Cost is higher for six-inch French Drain Compared to Four Inch Pipe.
                                                                                                                    2.  Many times 6 Inch French Drain Pipe is too large for many applications, Such as going under a fence or sidewalk.  
                                                                                                                   3.  The trench for a 6 inch French Drain must be much larger than a 4 Inch
                                                                                                                   4.  The amount of gravel or limestone or River Rock used to Cover the 6 inch French Drain is Much larger
 
All things being considered, the performance and longevity of a 6 inch French Drain is well worth it if you are trying to protect something of value to you!  If the higher cost and the additional labor and materials are not a problem and 6 inch French Drain pipe is not too big for what you want to do then a 6 inch French Drain would be the best.  
French Drain Installation can prevent water from getting into your air conditioner floor ducts.

French Drain in Flower Bed in Edmond

French Drain in Flower Bed in Edmond

 

 

A common Drainage Problem for people in Central Oklahoma is ground water seeping into floor air conditioner  ducts.  This can cause very costly damage to a home or business.  Water-proofing Ducts, or even worse, trying to remove mold from duct work can cost big bucks.   Structural Engineers typically recommend  French Drain Installation  to keep water out of ducts.   French Drains catch and remove sub-surface water that is traveling underground toward a foundation. It is intercepted by the French Drain before it can seep under the building in question.   Because this water is not usually seen, it may not be taken into consideration when diagnosing drainage problems.  Surface Water traveling to a problem area is obvious as it flows on the surface in plain sight.

Gutter connected straight into 6 inch French Drain System in Oklahoma City

Gutter connected straight into 6 inch French Drain System in Oklahoma City

CMG has 21 years of experience Diagnosing Drainage Problems.  We always check for sub-surface water flow into any Problem Drainage Area.  Again, French Drains are intended to handle water moving both underground and above ground.

Installing Channel Drain Across Sidewalk in Norman

Installing Channel Drain Across Sidewalk in Norman

 

French Drains can also be used to remove water that is standing in a large area such as up against a foundation or along a fence.  French Drains don’t do so well in tight small areas.  These areas are best suited for a Surface Drain with a grate.  Many times we install French Drains along foundations after a home owner has spent large amounts of money on foundation repair.

Surface Drain Installation in Edmond

Surface Drain Installation in Edmond

Several Foundation Repair companies and Duct waterproofing companies recommend CMG for French Drain Installation.    Typically we install a French Drain by itself or as part of a Drainage System  after they have completed their repairs to the foundation or duct work.

 

 

Curb Outlet for French Drain in Edmond Oklahoma

Curb Outlet for French Drain in Edmond Oklahoma

 

Drainage Problems occur in all types of places.  Water can stand along fences or driveways, or in yards and flowerbeds.   Damage can be done to sidewalks and in yards.  Finding a good Drainage Solution usually involves a French Drain.

 

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

CMG provides quality service for central Oklahoma.  If you live in Norman and need a French Drain, or if you live in Oklahoma City and want a Channel Drain installed across your driveway, give us a call.  We have installed Drainage Systems and French Drains in:  Oklahoma City, Edmond, Moore, Midwest City, Norman, Yukon, Mustang, Del City, Blanchard, Newcastle and all surrounding areas.

Installing Curb Outlet for French Drain in Oklahoma City

Installing Curb Outlet for French Drain in Oklahoma City

Recently we installed a French Drain in Norman.  Our customer had water running down the hill from his neighbor’s Sprinkler System into the North wall of his house.  Over time the ground became saturated and water seeped under the wall and into his floor air conditioning vents.  We installed a 4 inch French Drain along the North wall of his house to provide a barrier to the continuous water flow.  In a few days the moss that was growing on the side of his house began to die from lack of water.  A Duct company came in and cleaned out is vents.  The French Drain removed the surface and sub surface water that was flowing into his home.   Problem solved.

 

 

 


The term, “French Drain” gets thrown around a lot.  Many times people say they need a “French Drain,” when they mean Surface Drain, or Channel Drain.  It is becoming a Catch-All Phrase that may refer to any type of drain.  French Drains provide specific benefits that are different from Surface Drains.

Just what is a “French Drain?” Many times people incorrectly

French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

Perforated French Drain Pipe

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain March 2011

French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won’t have a measurable effect on the performance of the drain.

French Drain

DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

 

 The French Drain Installation we did this week was a little more difficult than normal.  Many times the route that a Perforated French Drain Pipe must travel to its exit point is not very easy from an installation point of view.  French Drains may have to travel through tree roots, (big ones) under sidewalks, through retaining walls, around swing sets or dog kennels or Mom’s Prize Rose Bush.  The 4 inch French Drain we installed this week was in Oklahoma City south of 23rd in an old part of town where all the houses were old 2 or 3 story homes with lots of huge Elm Trees.  The Elm Tree in Question actually was just an old stump that had been topped out but not completely removed.  They left the roots just for us!  The roots were growing into the homes foundation and were right in the way of the path of the French Drain.  Forty feet of solid Elm Roots and 4 chain-saw blades later We were successful in running a new French Drain through a tree stump.  Yuck! “Well you gotta  do what you gotta do!”

 

French Drain with colored river rock

French Drain with colored river rock

A little info about French Drain Pipe and Tree Roots.  Normally tree roots don’t seek out and penetrate French Drain Pipe.  Tree roots seek moisture and residual water that may stay inside Solid Drain Pipe.  French Drain Pipe is perforated.  Water that does not reach the exit point of the French Drain will seep out of the Pipe into the surrounding dirt.  Solid Drain Pipe that is used with Surface Drains can be penetrated and eventually clogged by roots if the pipe does not have good slope or “Fall”.  If the solid pipe does not drain well and has residual water, tree roots will seek it out.

Drain Pipe running from French Drain to the street in Oklahoma City

Drain Pipe running from French Drain to the street in Oklahoma City

Drainage Systems are designed to protect your home or business from standing water.  Storm-Water Runoff can cause damage in many ways.  Water from your gutters can seep down into your home’s foundation if it has no good way to drain off.  If the temperature then drops below freezing, the water around your foundation can freeze and cause serious damage to the home’s foundation.  Foundation repair can cost more than a Drainage System.

Drainage Systems typically make use of , French Drains, Surface Drains, or Channel Drains.  Depending on the Drainage Problem, A Drainage System may utilize one or several types of DrainsWe might install, for example, A Surface Drain in the middle of a driveway that runs to a gutter that is connected into the drain pipe.  The Drain Pipe might continue to a French Drain running parallel to a homes foundation.  Next the drain pipe might continue to a channel drain cutting across a sidewalk.  The Drain pipe might then reach its exit point running out through a curb fitting installed and cemented through the curb.

A Surface Drain basically is a basin that has a grate on the top.  A drain pipe is connected to the basin below ground.  The water flows in through the grate and down into the basin.  The water then exits the Basin through the Drain Pipe and move toward the exit point of  the Drainage System.  Surface Drains are designed to handle water that accumulates in a low areas.   These areas should not be too large or broad, and the water that drains into a surface drain should not be moving very fast.  Surface Drains can become overwhelmed if they are placed in an area that must move a large volume of water, quickly.  Selecting the correct drain for the specific drainage problem is a benefit that Oklahoma Drainage and Sprinkler Repair provides through twenty years of experience.

 


Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Oklahoma Drainage and Sprinkler Repair has been providing expert sprinkler repair  and installing French Drain Systems since 1993 for all of Central and Western Oklahoma.

If you would like to schedule an appointment or have a question, Call or Text to 405 203 9419

  Or E Mail to frenchdrain.sprinklerrepair@gmail.com

 FRENCH DRAIN IN EDMOND OKLAHOMA, DRAINAGE CONTRACTOR

Oklahoma Drainage and Sprinkler Repair Recently  installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

 

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the French Drain.  In some cases thick grass growing up through the French Drain will create a natural “Thatch” filter.  This makes the French Drain invisible.  The trick is to allow the grass to grow over the French Drain Gravel without covering it up with dirt.  Grasses such as Bermuda which grow well in the sun will put out runners and new roots and will grow up and through the French Drain.  This will not affect the performance of the French Drain.  The problem is that some times depending on the type of soil involved, it may take a long time to completely cover up the French Drain.  Sprinkling grass seed down in the gravel will speed up the process.
DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.   
If you install a French Drain in a sunny area, you can:
                                         A.  Leave the  French Drain as-is and allow grass to grow over it in time.
                                         B.  Add grass seed directly to the French Drain gravel with (Light Hand Watering) to speed the growth process
                                         C.  Leave the French Drain as-is but decorate it with stepping stones and landscaping rocks ( leaving large cracks between stones to allow water to get into the French Drain,
2
If you install a French Drain in a shady area you can:
                                        A.  Leave the French Drain as-is, it will work well and look as it did for many years.

B.  Leave the French Drain as-is, but decorate it with stepping stones or landscaping rocks.  Many French Drains are hidden under rock walk ways.

 

 

 

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

 

 

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

 

Channel Drain in Oklahoma City

Channel Drain in Oklahoma City

 

 

 


Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

Oklahoma Drainage and Sprinkler Repair Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

Once the Sprinkler System had been redesigned and the gutters had been connected, we ran the 6 inch Drain Pipe from the end of the French Drain, around the house to release through the curb.  We cut the curb and installed a 6 inch curb fitting with acrylic concrete.  A few days later a major thunderstorm poured down on the property.  The French Drain and the Drainage System Worked Perfectly.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.

Installing Channel Drain Across Sidewalk in Norman

Installing Channel Drain Across Sidewalk in Norman

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Installing a Curb Outlet for a French Drain in Oklahoma City

Installing a Curb Outlet for a French Drain in Oklahoma City

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

French Drain in Oklahoma City


Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

Installing Surface Drain in Driveway

 

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 

Oklahoma Drainage and Sprinkler Repair – 405203 9419

 

FRENCH DRAIN INSTALLATION IN EDMOND OKLAHOMA

French Drain running along foundation

French Drain running along foundation

Edmond Oklahoma has been the location for many French Drain Installations for us in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water.  The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right.  Next a French Drain Liner needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  We then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

 

A good Drainage System has a point where water enters the System.  This is usually through a French Drain, Surface Drain, or a Gutter Down Spout that is connected into a Drain Pipe.   Water will run through either Perforated French Drain Pipe or Solid Drain Pipe depending on the Drainage System Design.  Water will flow down hill to an Exit Point where the water will be released out of the Drainage System.  This is a done through a Pop-Up Emitter or a Curb Fitting.

 

Cutting The Curb and Installing Curb Fitting for French Drain

Cutting The Curb and Installing Curb Fitting for French Drain

Installing Cement around Curb Fitting for French Drain

Installing Cement around Curb Fitting for French Drain

 
 

A French Drain is a long perforated pipe in the bottom of a trench.  The trench runs through the problem drainage area.  The trench is filled with gravel or crushed lime stone.  The French Drain takes in water any place that water runs into the trench.

A French Drain will move large amounts of water from the Drainage Problem Area to the Exit point.

A French Drain will Drain away water that gets to the Drainage Problem Area in 3 ways.

1.  Water gets to the problem area by falling from the sky.

2.  Water gets to the problem area by flowing down hill over the ground.

3.  Water gets to the problem area by flowing underground. (Sub-Surface water flow)

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

Number 3,  Sub-Surface water flow is the big consideration.  When doing a Drainage Diagnostic, this is the area that is many times missed or not considered by less experienced companies.    Many Times it is cheaper and more effective to install a French Drain over a Surface Drain.  A Surface Drain can’t move as much water as a French Drain, and a Surface Drain can’t Drain away Sub-Surface waterSurface Drains should be installed in areas where the Drainage Problem area is smaller and is not affected by sub-surface water.

Surface Drain

Surface Drain

The draw back to a French Drain, is that it is not a pretty as a Surface Drain.

French Drains do a great job running along foundations and driveways.  A French Drain will keep water away from cement and prevent damage to concrete if water should freeze up against it.  A French Drain can keep your foundation Dry.

 

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Installing a Curb Outlet for a French Drain in Oklahoma City

Installing a Curb Outlet for a French Drain in Oklahoma City

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

French Drain in Oklahoma City

French Drain in Oklahoma City

French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

For Small business and Residential French Drains, Four inch ADS Perf/Soc French Drain pipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3 inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutter down spouts connected directly into the French Drain, For Example)  Three Inch French Drain Pipe should be avoided if possible.

Connecting Gutter into French Drain System in Moore

Connecting Gutter into French Drain System in Moore

Six inch  ADS Perf/Soc French Drain Pipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

The Drawbacks to 6 inch French Drain installation are:  1.  The Materials Cost is higher for six-inch French Drain Compared to Four Inch Pipe.
                                                                                                                    2.  Many times 6 Inch French Drain Pipe is too large for many applications, Such as going under a fence or sidewalk.  
                                                                                                                   3.  The trench for a 6 inch French Drain must be much larger than a 4 Inch
                                                                                                                   4.  The amount of gravel or limestone or River Rock used to Cover the 6 inch French Drain is Much larger
 
All things being considered, the performance and longevity of a 6 inch French Drain is well worth it if you are trying to protect something of value to you!  If the higher cost and the additional labor and materials are not a problem and 6 inch French Drain pipe is not too big for what you want to do then a 6 inch French Drain would be the best.  
 

FRENCH DRAIN, DRAINAGE SYSTEM, OKLAHOMA CITY, EDMOND, NORMAN, YUKON and all of Central and Western Oklahoma

Oklahoma Drainage and Sprinkler Repair — 405 203 9419

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

After Diagnosing a Drainage Problem in Oklahoma City, We installed a 6 inch French Drain that went all the way around the pool in the back yard and then ran all the way to the street on both sides of the house. The French Drain made the shape of a horse shoe. The Drainage System had two Curb Outlets installed through the curb at the street. This gave the French Drain two different directions to allow the water to flow to the street.  Two Drain Outlets allowed the French Drain to move a huge amount of water during heavy rains.   A few weeks  later we got a call from our customer after a heavy rain.  She was very happy.  The French Drain did a great job protecting her pool.  All the Storm Water was diverted around the Swimming Pool.

French Drain installation is a big focus for Oklahoma Drainage and Sprinkler Repair.   A French Drain is one part of a Drainage System.  A French Drain can be connected to other types of Drains or Gutter Down-Spouts and then run through Drain Pipe to an Exit point where the water is released.

A Drainage Exit Point is the area where water goes to be released when it comes out of the Drainage System. The two most common exit points for a Drainage System are a Pop-Up Emitter or a Curb Fitting.
A Pop-Up Emitter is a Fitting on the end of a Drain Pipe that has a lid that pops up and releases water. When water drainage is complete, the lid shuts back.

Gutter Downspout Connected to 6 Inch French Drain
Gutter Downspout Connected to 6 Inch French Drain

We Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   The our customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.  We installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, we specializes in just that!