Archive for the ‘Drainage Systems’ Category


walk way drain

French Drain Under Walk Way

Oklahoma Drainage and Sprinkler Repair recently installed a French Drain along the edge and under a Stepping Stone walkway.  The Work took place In Choctaw East of Choctaw Road.

Every time it rained, our customer had water standing on the walkway between the pool and the house.  Not only would the water stand there but it stayed there a long time.

To solve the problem, we took apart the walkway and dug a trench about 18 inches deep along the East side of the walkway.  Next we put a trench liner in the trench which is white and maintains the integrity of the drainage trench.  It allows water to pass through it but keeps sand and debris out of the perforated French Drain Pipe.  The French Drain pipe itself also has a neo preen soc and the perforated pipe as well.  This gives the French Drain Pipe two levels of protections from sand and dirt getting into the pipe.

clogged French Drain Pipe

result of French Drain Installed Incorrectly without a liner of filter

Next, we connected a solid drain pipe to the French Drain.  It ran from the center of the French Drain perpendicularly across the walk way, down the hill 70 feet to the pop up emitter.

When digging the trench for the Drain Pipe, we carefully cut the sod in the yard and replaced it back once the drain pipe had been installed.  In a couple of weeks you won’t be able to tell that we ever dug a trench there.

 

cutting sod for trench

Installing Drain pipe and Replacing the sod

Next, it was time to put the walkway back together.  The pave stones were put back into place and a nice colored gravel was put in the cracks around the walkway stones.

New Edging was also installed around the walkway.

French Drain walk way

French Drain Installed along and under walk way to pool.

 

 

walk way french drain

Completed French Drain under walk way


French Drains and Surface Drains as part of Drainage Systems

This is a series of blogs that first explains exactly what French Drains and Surface Drains are,  and how they are used in a Drainage System.

Next, I will explain exactly what the benefits and drawbacks are of each type of drain and why you would use one type of drain over another in many different situations.

Last, I will explain the specifics of how to install your own Drainage System and how to diagnose exactly what type of system you need in the first place.

At the top and  bottom of every blog in this series will be a listing of all the connecting blogs that you can “Click” on to easily move back and forth through the series.

Next Blog

A French Drain is just a part of a Drainage System.  Many people refer to basically any type of Drain in or around their home as a French Drain.  This actually in not correct.

 

Before you can really understand what a French Drain is, you first must be familiar with a Drainage System and what it involves.

A Drainage System has three parts.  It has an “Intake” to bring water into the Drainage System.  It is placed in a low area where water is standing or is in area where water sometimes runs across it over the surface or under the surface or both.  An “Intake” will be a French Drain, Surface Drain or Sump Pump.

In a Simple Drainage System there will only be One “Intake.”  In a Complex Drainage System there will be several Intakes.  They may vary in type and size.  For Example, You may have a Drainage System with a Surface Drain, and a French Drain and a Sump Pump all as separate  Intakes in the Drainage System.  The Intakes will vary in number and type depending on what water issues you are trying to fix.

The “Transition” is the second part of the Drainage System which is the Drain Pipe that moves the water out of the area that is flooded.  It is your water “High Way, ” as it were.  Typically there are two types of Transition Drain Pipes that will be covered later.

Finally you have an “Exit” which releases the water from the drainage system.  It must be in an area that is lower than the French Drain or Surface Drain that is you “Intake.”

 

 

A French Drain  is a perforated pipe that is basically full of slits or holes.  A trench is dug across the problem drainage area.  The dirt from the trench is hauled away.  The perforated pipe is placed in the trench.  The Drainage trench is dug deep enough so that the perforated French Drain Pipe is several inches below ground level when placed in the trench.  Next gravel or some type of crushed stone is placed on top and around the French Drain perforated pipe until the trench is full.

 

Once a French Drain is completed you will see gravel on the surface in a place where dirt use to be.

A French Drain is designed to take in and move a large amount of water.  It covers a large area with water standing on or moving across the area.  It needs to have some “Slope” or “Fall” to drain the water.  The pipe needs to run down hill to the exit point to release it from the Drainage System.  If it is up hill in all directions from the French Drain then there is a problem.  We all know that water will not flow up hill.  Some times this can be overcome when it is only slightly up hill by digging the trench deeper as you go up hill.  Still the exit point in the Drainage System must be lower than the French Drain where the water is taken into the drainage system, or the water will never drain.

In conclusion, a French Drain is a perforated Pipe in a trench covered in gravel.  It is the “Intake” part of a Drainage System.  It covers a wide area and needs to be higher than the exit point of the Drainage System.

This is the first in a series of blogs about French Drains and all other types of Drains as well.  If you would like to learn more just Click on the “Next Blog” below.

Next Drain Blog


French Drain Installation Or Do You Need A Surface Drain?

Many Folks don’t know the difference.   Actually there are many differences and a few similarities.  One difference is, a French Drain takes in a larger amount of water into the drain Pipe than a Surface Drain.  There are advantages to Surface Drains as well.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Oklahoma Drainage and Sprinkler Repair recently diagnosed a Drainage Problem in  South Oklahoma City.  The Home owner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.  The French Drain Pipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drain pipe.  In the end, we were able to dig up the pipe and Replace it.

French Drain Detail

New Trench for French Drain

Next we installed a new exit for the water by installing a curb fitting.

No more flooding in the customers basement.  A few weeks later our customer was able to lay carpet in the basement with no problems.

French Drain side of House

French Drain Installed Along Stem Wall

 

Installing Drainage Curb Fitting for a French Drain in South Oklahoma City

 

curb cement outlet

Curb Fitting with Acrylic Cement For French Drain

 

FRENCH DRAIN  CONNECTED TO GUTTERS

Many different types of Drains can be hooked together by one Drain Pipe.  The Drain Pipe then running to an Exit Point makes up a Drainage System.  One common type of Drain used in a Drainage System is A “French Drain.”  Many times a French Drain is installed close to a building foundation or in a low area next to a home or business.  This puts the French Drain in close proximity to Gutter Down Spouts.  Rather than have water come off the roof and out the Down Spout and on to the ground below, many times it is much better to tie a Gutter Down Spout Directly into a French Drain or near by Drain Pipe depending on the Drainage System Design.   Connecting The Down Spouts Directly into a French Drain is much  more efficient and causes suction to occur in the French Drain.  Connection of Gutter Down Spouts to a French Drain makes the Drainage System work better.

Do you have water standing in your yard after a hard rain? Does your sidewalk become a moat during a thunder-storm? Is standing water causing your foundation to deteriorate and break down? Is water seeping into your home and causing mold?

Storm-water run off can cause many types of problems. Oklahoma Drainage and Sprinkler Repair can diagnose your drainage issues and design a Drainage System to fit your specific needs. We install many types of drains including: French Drains, Channel Drains, Surface Drains, Basin Drains, Trench Drains, Basement Drains, and Sump Pumps.

gravel colored

Colored Gravel for a French Drain

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Just what is a “French Drain?” Many times people incorrectly

French drain in grass
A French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

Perforated French Drain Pipe

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

French Drain with Colored Gravel

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won’t have a measurable effect on the performance of the drain.

DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together. Many times a French Drain, might be connected to a Surface Drain,  which then could be connected to another French Drain.   Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Cutting The Curb and Installing Curb Fitting With Acrylic Cement
Cutting The Curb for French Drain Outlet

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional French Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a French Drain  which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.

2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the pipe that is connected to the drain.

Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows down hill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drain Pipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains

3 inch, 4 inch, and 6 inch Drain Pipes

3 inch, 4 inch, and 6 inch French Drains

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

 

 

 


French Drain Installation is a primary focus fore Oklahoma Drainage and Sprinkler Repair.  We have been installing French Drains as part of Drainage Systems since 1993.   We also install Surface Drains, Channel Drains, and Sump Pumps to fit our customers needs.

A Drainage System is made up of three parts.  An Intake, a transition, and and Exit.

An intake is a Drain or a group of Drains that brings water into the Drainage System.  It can be a French Drain, Surface Drains, Channel Drain, or Sump Pump.  A Drainage System can have one intake or several.  If more than one, it can be any combination of French Drains, Surface Drains, Etc.

For Example: You might have a Surface Drain set in your sidewalk and a Channel Drain next to your driveway and a French Drain in your yard.  They all connect to each other through drain pipe and feed water into the Drainage System.

The Transition is the Drain Pipe that takes the water to the exit point.  It can be a large pipe or small depending on how much water needs to be moved and how fast it needs to drain.  More than one Drainage Exit Point.  This increases the amount of water that the Drainage System can move.

There are other things to take into account and consider as well.

 

Oklahoma Drainage and Sprinkler Repair installs French Drains and Surface Drains in lawns, flower beds and many other places.  We also install Surface Drains and Channel Drains Set in concrete in sidewalks and driveways.  Wherever you need a Drain to help protect your home or property, we are there to help.  Experience Counts, going on 27 years now.

A French Drain Can Handle Surface and Sub-Surface Water

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.

2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the pipe that is connected to the drain.

Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows down hill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drain Pipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains

3 inch, 4 inch, and 6 inch Drain Pipes

3 inch, 4 inch, and 6 inch French Drains

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

 

Another Storm is headed our way.  It looks like a WET FALL.  Every time it rains, Do you have water standing in the wrong place?  Even worse!  Do you have water seeping into your home or business?  If you have water standing in your yard, on your sidewalk, or dripping into your basement, Oklahoma Drainage and Sprinkler Repair can help.  We have been designing Drainage Systems for Homes or Business since 1993.

cement channel drain

Channel Drain in Sidewalk

Today we installed a Drain Basin and a Sump Pump in front of a recessed basement door.  Problem solved!  

We can deal with a wide variety of Drainage Problems, Specializing in: French Drains, Surface Drains, Channel Drains, Trench Drains, Basement Drains,  and Sump Pumps.

WHAT DRAINAGE PROBLEM CAN WE SOLVE FOR YOU?

 

 

standing water

A good place for a French Drain 


Oklahoma Drainage and Sprinkler Repair Drainage System Installation, French Drain Installation, Lawn Sprinkler Repair, Since 1993.

Servicing: Oklahoma City, Norman, Edmond, Lawton, Duncan, and all of Central and Western Oklahoma

A good place for a French Drain

 

Just what is a “French Drain?” Many times people incorrectly

French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain March 2011

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

French Drain with Colored Gravel

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won’t have a measurable effect on the performance of the drain.

DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.


Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Oklahoma Drainage and Sprinkler Repair – We have over 27 years of experience solving all types of standing water and drainage issues. 

 

Since 1993 we have installed over 2000 Drainage Systems in Oklahoma.  Over the years we have utilized French Drains, Surface Drains, and Channel Drains as important parts of Drainage Systems.

A Drainage System has 3  Parts, an “Intake” A “Transition”, and an “Exit.”

A Channel Drain is an Inlet for a Drainage System

The Intake is where water is taken in to the Drainage System.  This is done with a French Drain, Surface Drain, or Channel Drain.  There may be several intakes in one Drainage System depending on the Drainage needs.

The Transition is simply the pipe that takes the water to the Exit Point.

The Exit point is the place where the water leaves the Drainage System.  Typically through a “Pop Up Emitter” or a ” Curb Outlet.

 

Standing water can cause many types of property damage ranging from foundation problems to cracked sidewalks and dead plants and shrubs.  If you have need of French Drain or Surface Drain, give us a  call.  We provide free estimates for all of central Oklahoma.

French Drain With Colored Gravel in Oklahoma City

French Drain With Colored Gravel in Oklahoma City

 

Installing Cement around Curb Fitting for French Drain in Norman

Installing Cement around Curb Fitting for French Drain in Norman

Some Drainage Systems are complex and incorporate several types of drains.  Most Drainage Systems , however are basic and require just one type of DrainOklahoma Drainage and Sprinkler Repair installs a variety of drains to solve a variety of problems. French Drains, Surface Drains, and Channel Drains are most commonly used.  If you live in Edmond and need a Channel Drain installed across your driveway, or if you live in Norman and need a French Drain in your backyard, or if you live in Oklahoma City and need a Surface drain installed next to your sidewalk, we can help.

Channel Drains are one kind of Surface Drain that we install in concrete.

The most common Drain that we install is the French Drain.  This is because the French Drain is versatile.  It can handle Surface Water Problems or Underground Water Problems (sub-surface).  A huge mistake that many people make is assuming that water gets to a Problem Drainage Area by flowing over the surface only.  For example, if water is flowing down hill underground toward your home’s foundation, the only way to stop or intercept it is with a French Drain.  Water can flow laterally into a perforated French Drain Pipe.  It is then diverted away from the Problem Drainage Area to an Exit Point.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

Pop Up Emitters can release water from Surface Drains or French Drains.  They can release water on to sidewalks or driveways, or out in the middle of yards.

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 

 

Pipe running to street form French Drain in back yard.

Pipe running to street form French Drain in back yard.

When we run Drain Pipe across yards to an Exit Point, the sod usually can be put back into place and in a few days you can’t tell a French Drain was ever Installed.
A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the French Drain.  In some cases thick grass growing up through the French Drain will create a natural “Thatch” filter.  This makes the French Drain invisible.  The trick is to allow the grass to grow over the French Drain Gravel without covering it up with dirt.  Grasses such as Bermuda which grow well in the sun will put out runners and new roots and will grow up and through the French Drain.  This will not affect the performance of the French Drain.  The problem is that some times depending on the type of soil involved, it may take a long time to completely cover up the French Drain.  Sprinkling grass seed down in the gravel will speed up the process.

DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.   

Installing a Curb Outlet for a French Drain in Oklahoma City

Installing a Curb Outlet for a French Drain in Oklahoma City

If you install a French Drain in a sunny area, you can:
                                         A.  Leave the  French Drain as-is and allow grass to grow over it in time.
                                         B.  Add grass seed directly to the French Drain gravel with (Light Hand Watering) to speed the growth process
                                         C.  Leave the French Drain as-is but decorate it with stepping stones and landscaping rocks ( leaving large cracks between stones to allow water to get into the French Drain,
2
If you install a French Drain in a shady area you can:
                                        A.  Leave the French Drain as-is, it will work well and look as it did for many years.

                                        B.  Leave the French Drain as-is, but decorate it with stepping stones or landscaping rocks.  Many French Drains are hidden under rock walk ways.

French Drain in Oklahoma City

French Drain in Oklahoma City


Sometimes Surface Drains make more sense when the Drainage Problem area is fairly small with Surface Water Flowing into it.

 

French Drain with stepping stones

French Drain with stepping stones


Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

 FRENCH DRAIN IN EDMOND OKLAHOMA, DRAINAGE CONTRACTOR

Oklahoma Drainage and Sprinkler Repair Recently  installed a large 6 inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.  The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.  The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

 

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

Running French Drain Pipe Under Sidewalk

Running French Drain Pipe Under Sidewalk

The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the French Drain.  In some cases thick grass growing up through the French Drain will create a natural “Thatch” filter.  This makes the French Drain invisible.  The trick is to allow the grass to grow over the French Drain Gravel without covering it up with dirt.  Grasses such as Bermuda which grow well in the sun will put out runners and new roots and will grow up and through the French Drain.  This will not affect the performance of the French Drain.  The problem is that some times depending on the type of soil involved, it may take a long time to completely cover up the French Drain.  Sprinkling grass seed down in the gravel will speed up the process.
DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.   
If you install a French Drain in a sunny area, you can:
                                         A.  Leave the  French Drain as-is and allow grass to grow over it in time.
                                         B.  Add grass seed directly to the French Drain gravel with (Light Hand Watering) to speed the growth process
                                         C.  Leave the French Drain as-is but decorate it with stepping stones and landscaping rocks ( leaving large cracks between stones to allow water to get into the French Drain,
2
If you install a French Drain in a shady area you can:
                                        A.  Leave the French Drain as-is, it will work well and look as it did for many years.

B.  Leave the French Drain as-is, but decorate it with stepping stones or landscaping rocks.  Many French Drains are hidden under rock walk ways.

 

 

 

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

 

 

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

 

 

 

 


French Drain Installation Lawton, Oklahoma City, Edmond, Yukon, 
Expert Sprinkler Repair with Emergency After Hours Service Avaliable
Servicing all of Central and Western Oklahoma
Oklahoma Drainage and Sprinkler Repair 405 203 9419

Today we are installing a French Drain system for a customer in East Norman.  She has water running into her front door through her flower bed.  The bed acts like a pond and over-spills onto her front porch and then through her front door.  To solve the problem, we are installing a French Drain running across her flower bed and under her sidewalk.  Once under the sidewalk the French Drain will connect to Solid Drain Pipe and continue on down the hill to the exit point where we will install a pop-up emitter.  There are two gutter downspouts that will be connected into the French Drain System along the way.  Our customer chose colored gravel to cover her French Drain.  She liked the way it looked with her plants in the flower bed.  There are many choices when selecting the gravel to cover a French Drain.

 

Oklahoma Drainage and Sprinkler Repair — 405 203 9419

 

French Drain with colored river rock along foundation

French Drain with colored river rock along foundation

 

French Drain Pipe running to curb outlet in Oklahoma City.

French Drain Pipe running to curb outlet in Oklahoma City.

 

 


French Drain Installation Oklahoma City, Lawton, Norman, Edmond

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Servicing all of Central and Western Oklahoma

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

 

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 

Oklahoma Drainage and Sprinkler Repair – 405203 9419

 

FRENCH DRAIN INSTALLATION IN EDMOND OKLAHOMA

French Drain running along foundation

French Drain running along foundation

Edmond Oklahoma has been the location for many French Drain Installations for us in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water.  The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right.  Next a French Drain Liner needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  We then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Running Drain Pipe across Front Yard for a French Drain

Running Drain Pipe across Front Yard for a French Drain

 

A good Drainage System has a point where water enters the System.  This is usually through a French Drain, Surface Drain, or a Gutter Down Spout that is connected into a Drain Pipe.   Water will run through either Perforated French Drain Pipe or Solid Drain Pipe depending on the Drainage System Design.  Water will flow down hill to an Exit Point where the water will be released out of the Drainage System.  This is a done through a Pop-Up Emitter or a Curb Fitting.

 

Cutting The Curb and Installing Curb Fitting for French Drain

Cutting The Curb and Installing Curb Fitting for French Drain

Installing Cement around Curb Fitting for French Drain

Installing Cement around Curb Fitting for French Drain

 
 

Oklahoma City French Drain Installation,  Servicing all of Central and Western Oklahoma

Standing Water can cause all types of problems in and around homes in Oklahoma.

swampy french drain area

A good place for a French Drain

Oklahoma Drainage and Sprinkler repair can help.  We can put a Drain in a Driveway, or fix a leaking Sprinkler Valve.

If you have water standing in your yard and need a French Drain, or have a broken Back Flow Valve that has frozen and is leaking, We can help.

405 203 9419

French Drain Pipe running to curb outlet in Oklahoma City.

French Drain Pipe running to curb outlet in Oklahoma City.

 

 

 

When installing a Drainage System of any type, a decision must be made on the size of Drain Pipe used.  Typically 6 inch, 4 inch, and 3 inch are the most common in Residential Drainage Systems.

 

If you have one or two 6 inch Surface Drains or a stretch of French Drain that is less than 10 feet, then a 3 inch drain pipe can be used.   Three inch drain pipe is used for low volume applications.

4 inch and 6 inch

4 inch and 6 inch Drain Pipe

If you have two or three 12 inch Surface Drains or a stretch of French Drain that is 60 feet or less, then 4 inch drain Pipe should do the job.

If you have Six 12 inch Surface Drains or less or 100 Feet of French Drain, Then the use of 6 inch drain pipe becomes necessary.

two French Drain

100 feet of french drain

These numbers can be exceeded.  More Surface Drains or French Drain can be added to the above listing, however the drain pipe will be overwhelmed at times of heavy rain.  If it is OK with you for your French Drains or Surface Drains to Stand Underwater for a while until the Drainage System can catch up and clear the excess water away.  How long it stays underwater varies from one application to another.

Slope is a big consideration.  If your drain pipe runs downhill nicely and the water moves quickly, then you can exceed the above numbers.  If you have very little slope and your Drain Pipe only runs downhill slightly, then installing fewer drains is definitely a good idea.

Connecting a gutter downspout to a drain that only has a small slope is always a good idea.  The water on the roof has nice velocity when it comes out the gutter and into the drain pipe.  It speeds up the water movement when the slope ins’t very good.  It also causes suction behind the gutter downspout in the French Drain or Surface Drain that you have installed.