CMG Sprinklers and Drains — In business since 1993. Servicing all of central Oklahoma, Including: Oklahoma City, Norman, Moore, Edmond, Midwest City, Del City, Blanchard, Newcastle, Mustang, and Yukon. We Install Drainage Systems that utilize French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps. CMG also provides the best Sprinkler System Installation and Sprinkler Repair.
Our most recent Sprinkler System Installation was in East Oklahoma City. It was a Five Zone Sprinkler System. The Sprinkler Heads were Rain Bird 5004s with Rainbird 4inch Popup Sprinkler Heads in the flower beds. The Controller was a Hydro-Rain Sprinkler Controller with a Rain-Freeze Sensor attached. The Sprinkler System Installation took two days.
CMG Sprinkler and Drain — CMG has installed Lawn Sprinklers in Edmond and all of Central Oklahoma since 1993. Typically we install Rain Bird Lawn Irrigation Systems but will install all other major brands at customers request.
Recently we installed a seven zone Rain Bird Sprinkler System near Penn and 172 nd st. We installed Rain Bird 5004 model Sprinkler Heads along with a Rain- Freeze Sensor.
The Lawn Irrigation System took two days to install. More fun in the sun on a hot day.
If you are tired of dragging hoses around trying to keep your yard alive, consider a Lawn Sprinkler System Designed by CMG.
We service all of Central Oklahoma including: Edmond, Norman, Moore, Yukon, Mustang, Newcastle, Del City, Midwest City, Oklahoma City, Purcell, and Blanchard.
We also Specialize in French Drains and Surface Drains and all types of Drainage Systems. If you need a channel drain installed across a sidewalk or a metal grate put in a driveway, Give us a call.
Sprinkler System Installation in Oklahoma can be complicated. There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come. Attention to detail makes all the difference when installing a Sprinkler System. Many times, So-Called, ” Fly By Night Sprinkler Companies,” cut lots of corners to save money. Low price should not be the determining factor for having a Sprinkler System installed. A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.
Two things you should require on any Sprinkler System:
1. Make shure PRIMER is used along with PVC Glue when the Sprinkler Pipe is put together. Primer helps the glue to bond to the PVC pipe. This ensures that all the pressurized pipe connections won’t leak over time. I have seen Sprinkler Systems that were no more than a year old that leaked everywhere. Again some Sprinkler Contractors will cut corners with the Primer.
2. Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.” This ensures that no leaks will occur over time at this connection. The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on. A connection with Glue and Primer will not hold up to the stress over time. This is why a Compression T must be used. This is another area that some Sprinkler Contractors choose to cut corners.
The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.
For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.
My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993. I take great pride in my work. The Letters “CMG” stand for the first letter of the first name of each of my children. ( Chance, Melissa, Garrett ) = CMG
I have amassed a great deal of experience designing and installing Sprinkler Systems, Repairing Sprinkler Systems, and designing and installing Drainage Systems. In the past 19 years, I have made mistakes, but I have learned from them. As a result I get calls, from time to time, from other Sprinkler and Drainage companies that have run into a problem that they can’t handle. I am always glad to help.
I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or French Drain Installation. I prefer that the customer pay me when the job is complete and they are happy with the work. In a few cases on very large jobs I request a draw or outlay for parts. The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw. The parts stay on the premises until they are installed.
Please leave a comment at the bottom if you like.