Moving Sprinkler Heads, Oklahoma City, Norman, Edmond, Lawton, Norman, Midwest City, Yukon

Posted: January 20, 2020 in lawn sprinkler repair, sprinkler repair
Tags: , , ,

Sprinkler Heads need lots of attention when you have a sprinkler system.   Sometimes a Sprinkler Head needs to be moved.  Landscaping changes, bad original sprinkler head placement, or you just want to move it.  Oklahoma Drainage and Sprinkler Repair can help.

Sprinkler Heads can Freeze and break in the winter time if your sprinkler runs at a bad time or if In-line sprinkler pipe drains were not installed originally.  Dogs like to chew on them and dig them up. Sprinkler Heads get broken when a car or truck is driven across the yard.  But, the majority of sprinkler head damage is done by weed eaters and lawn mowers.

Oklahoma Drainage and Sprinkler Repair has been fixing broken sprinkler heads since 1993.  If you need a sprinkler head fixed, replaced, adjusted, or moved, we can help.

 

 

Sprinkler RepairLeaking Sprinkler Pipes, Broken Sprinkler Heads, Back-Flow Valve Problems, Moving Sprinkler Heads, Adjusting Sprinkler Heads, Sprinkler Wire Problems, Controller Programming Trouble, Sprinkler Valve Problems.  We do it all.

Oklahoma Drainage and Sprinkler Repair 405 203 9419

 

Oklahoma Drainage and Sprinkler Repair provides Emergency Sprinkler Repair Service, After Hours and Weekends.  405 203 9419

Sprinkler Repair is an ongoing issue for any sprinkler system.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.    We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Recently we fixed a sprinkler system that was poorly installed.

  The Sprinkler System Company that installed it didn’t know what they were doing.  There was no Master Valve installed in the Sprinkler System.  As a result, The Sprinkler Pipe between the water meter and the Sprinkler Valves stayed pressurized all the time.  This is bad during a cold snap in Oklahoma.  If a Master Valve and In-Line Pipe Drains had been installed originally, there would be no broken pipes when it got too cold.    The Sprinkler Pipes would drain automatically.
sprinkler Drain
Comments
  1. […] surface than the sprinkler pipe, As a Result, It is more likely to freeze.  Oklahoma Drainage and Sprinkler Repair Can easily Replace Sprinkler heads that have frozen.  We also can install in-line Drains in […]

Thank you for your comments.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.