Sprinkler Repair Information, Sprinkler Installation, Oklahoma City, Norman, Edmond

Posted: February 4, 2015 in lawn sprinklers, sprinkler repair, sprinklers
Tags: , ,

CMG Sprinklers and Drains started 2015 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not too small.  CMG can install Sprinkler Systems with Pumps as small as 3/4 horse.   We also install Sprinkler Systems connected to any standard residential water meter up to two inch.

Sprinkler Valve installation in Edmond

Sprinkler Valve installation in Edmond

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Back-Flow Valve installation in Norman

Back-Flow Valve installation in Norman

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.  If it was installed by CMG, then you call us.  A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

CMG also installs Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.

405-226-0629                        cmgsprinklers@hotmail.com   or cmgsprinklers@gmail.com

Comments
  1. […] are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  2. […] Repair is also very popular this time of year.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.  CMG Sprinkler Repair Specialist […]

  3. […] Sprinkler Repair Information, Sprinkler Installation, Oklahoma City, Norman, Edmond February 4, 2015Sprinkler Repair —  Sprinkler Installation — Agnie’s List Award winner CMG Sprinklers and Drains started 2015 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not [… […] blanecallen […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s