Oklahoma City Sprinkler System Installation, French Drain, Sprinkler Repair! –

Posted: December 31, 2012 in broken sprinkler head, Drainage System, french drain, sprinkler repair, sprinklers
Tags: , , , ,

 

Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

This Blog post is titled : Oklahoma City Sprinkler Installation, French Drain, Sprinkler Repair.

Sprinkler System a year after installation

Sprinkler System a year after installation

Sprinklers Installation is a primary focus for CMG.   Our Lawn Sprinkler Systems are fully automatic and self-draining.  Typically we install the Sprinkler Controller in a garage or on an outside wall.  It only needs an electrical outlet to plug into.  CMG  installs in-line drains in the sprinkler pipes.  When the Sprinkler System is not running, the In-line Drains open and drain the water out of the Sprinkler Pipes underground automatically.  The Sprinkler System Drains itself after each time it is run.

Sprinkler Repair can be very simple and easy or very elaborate and difficult.  CMG has provided expert Sprinkler Repair since 1993.

Sprinkler Systems can develop a wide variety of problems.

CMG Sprinklers and Drains can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking Sprinkler Pipes

4.  Shorted or disconnected  Sprinkler Valve Wires

5.  Sprinkler Zones or Sprinkler Stations that won’t work

6.  Broken Sprinkler Heads

7.  Sprinkler Head Adjustment

The Sprinkler System Problems listed above are the most common Sprinkler Problems that we deal with.

CMG Sprinklers and Drains – can help if you need to re-design your Sprinkler System.  If for example you are adding a swimming pool in your back yard, we can move the Sprinkler Heads and Sprinkler Pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

If you have questions concerning sprinkler systems or drainage systems please send us an e-mail at — cmgsprinklers@hotmail.com

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler SystemsRepairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Please leave a comment at the bottom if you like.

Blane Callen

This concludes: Oklahoma City Sprinkler Installation, French Drain, Sprinkler Repair.

Comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s