Angie’s List has awarded CMG Sprinklers and Drains  their top rating for customer service and lists CMG with an “A” rating.  CMG Installs Drainage Systems, Lawn Sprinkler Systems and provides Expert Sprinkler System Repair.   Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump PumpsSprinkler Systems installed by CMG use Rain Bird or Hunter Sprinkler Parts.  With over 20 years of experience we provide top quality Sprinkler Systems, French Drains, Drainage Systems, and Sprinkler Repair.


CMG Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman
Drainage System Installation in Norman

 

Oklahoma City Sprinkler System Installation is a central focus for CMG Sprinklers and Drains.  We also install lawn sprinkler systems in surrounding towns such as Edmond, Norman, Moore, and all other areas of Central Oklahoma. Now is a great time to consider a new Lawn Sprinkler Irrigation System by CMG. CMG Sprinklers and Drains installs top of the line Sprinkler Systems that are dependable and last for decades.  Yes, I said decades!  We warranty our sprinkler systems for two years,  but we build them to last much longer.  We started small in Norman in 1993.  The sprinkler systems installed that year, to my knowledge are functional and going strong.

From time to time CMG Service Experts must work on a sprinkler system that we installed.  Usually it is for reasons beyond our control like, “lightning burning up a sprinkler controller” or,  “a customer running over a sprinkler head with their car.”

CMG designed sprinkler systems are fully automatic and self-draining.  When the sprinklers are not running, the system automatically drains the sprinkler pipes under ground.  If it gets cold there is no water in the sprinkler pipes to freeze.  We also install Rain/Freeze Sensors which prevent your Lawn Sprinkler System from running when it is too wet or cold and no one is around to turn off the Sprinkler System.

CMG provides Drainage Solutions for homes and small businesses.  If you live in Norman and have water standing on your sidewalk every time it rains, or if you live in Edmond and have water seeping under your foundation, or if you live in Oklahoma City and your backyard turns into a moat after a thunderstorm, Give CMG a call.  We can install a surface drain in the middle of a sidewalk,  or a channel drain across a driveway, or a french drain along a foundation to prevent water from standing and causing damage.  Remember, for Drainage System or Sprinkler Installation in Oklahoma City or Central Oklahoma, Call CMG at 405-226-0629

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler SystemsRepairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Check out our other Web Sites!

 

blanecallen.wordpress.com

 

activerain.com/blanecallen

 

btnbusinessblog.wordpress.com

 

cmgsprinklersanddrains.com 

 

cmgsprinklersanddrains.blogspot.com

 

 

Please leave a comment at the bottom if you like.

Blane Callen

French Drain Installation, Sprinkler Installation, Sprinkler Repair

Comments
  1. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  2. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  3. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  4. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  5. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  6. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  7. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  8. […] Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many […]

  9. […] Oklahoma City, Moore, Norman, Edmond, Yukon, Mustang, Midwest City, and all surrounding Central Oklahoma.   […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s