Oklahom Drainage and Sprinkler Repair 

405 203 9419

 

Specializing in: (1)  Sprinkler Repair.  (2)  Sprinkler System Redesign and Makeover.  (3)  French Drains, Surface Drains, and Channel Drains.  (4)  Basement Drains, Sump Pumps, and Gutter to Drain Connections.  Servicing: Oklahoma City, Norman, Moore, Mid West City, Del City, Yukon, Mustang, Blanchard, Purcell, and Edmond.   Free Estimates

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

 

SPRINKLER REPAIRDRAINAGE SYSTEMS FRENCH DRAINSPRINKLER ADJUSTMENTSURFACE DRAIN EMERGENCY SPRINKLER REPAIR

Norman Sprinkler Repair 

Recently we had a customer in Norman who had some trouble with a sprinkler head that was leaking at the base.  There was mulch all around the sprinkler head and when the system ran it blew mulch all over the sidewalk.  This is a typical Sprinkler Repair and occurs quite often.  It took us about 15 minutes to fix.  We also moved several Sprinkler Heads that weren’t in the best places.  Moving sprinkler heads is a common practice for Oklahoma Drainage and Sprinkler Repair.

Oklahoma Drainage and Sprinkler Repair –  Expert Sprinkler Repair for all Residential Lawn Sprinkler Systems

Emergency Service – After hours and Weekends

We service all of Central and Western Oklahoma

Since 1993 we have:

Fixed leaking sprinkler pipes in Edmond

Replaced Sprinkler Valves in Norman

Adjusted Sprinkler Heads In Oklahoma City

Installed A New Back Flow Valve In Lawton 

and over 2000 other Sprinkler Repairs in Central and Western Oklahoma.

Broken Sprinkler Head took about an hour to fix.

Sprinkler Repair is an ongoing issue for any sprinkler sy

Moving sprinkler valves also is a service that we provide.  It takes a lot more expertise and experience to move sprinkler valves.  There are many reasons that sprinkler valves and sprinkler heads may need to me moved.  Driveways can be added or new landscaping may be installed.  We can redesign any residential sprinkler system Moving Sprinkler Valves, Sprinkler Heads, Sprinkler Pipes, and Sprinkler Wiring is what it takes.

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We at Oklahoma Drainage and Sprinkler Repair, take great pride in the Sprinkler Repair Services that we provide.  In almost 27 years of service,We have solved virtually every Sprinkler Repair Problem possible.

 

We solve Sprinkler Repair Problems that other companies can’t handle.  If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call or send us an

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

The above are the most common problems that we deal with.

 

 

 

Sprinkler System Repair  Broken Sprinkler Heads — Sprinkler Controllers — Sprinkler Valves — All Brands

Servicing:  Oklahoma City — Norman — Moore — Edmond — Mustang — Yukon — Midwest City — Del City — Blanchard — Newcastle 

AND ALL CENTRAL OKLAHOMA.

Now Servicing Western Oklahoma including Lawton and Altus.

 

 

Fixing Leaking Sprinkler Pipes is a common occurrence for Oklahoma Drainage and Sprinkler Repair.  Most recently we had a service call in Lawton.  We got a call from a lady who had water pouring out from under the edge of her driveway.  After shutting off the water at the back-flow valve, we were able to determine that the leak definitely was coming from the sprinkler system.  A cracked sprinkler pipe was the problem and to make matters worse, the sprinkler pipe ran under the driveway.

Oklahoma Drainage and Sprinkler Repair had the solution.  Instead of trying to fix the broken sprinkler pipe, it was a much better idea to replace the entire pipe.  The Sprinkler Repair took about three hours.

Oklahoma City Sprinkler Repair

Recently we helped some folks with their sprinkler controller.  They had a lightning strike melting their sprinkler controller and all the connecting wires. Changing the Sprinkler Controller took a little time, but the larger problem was changing out all the sprinkler wires that ran underground form the controller to the sprinkler valves.  This part took a while and required quite a bit of attention to detail.

SPRINKLER REPAIR IN OKLAHOMA CITY

The sprinkler valve in the picture was replaced by Oklahoma Drainage and Sprinkler Repair. When the Sprinkler Valves were originally installed, they were not put inside a “Valve Box” to protect them. The company that installed them just dumped dirt on them and got paid and left. The Sprinkler System ran ok for about two years before the sprinkler valves failed. We replaced the valves and added a valve box to protect them so this time the Rain Bird valves should last much longer. If you need help with your sprinkler system, give us a call at 405 203 9419. Oklahoma Drainage and Sprinkler Repair has been solving sprinkler problems since 1993.

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Do you need Sprinkler Repair?

Winter is a time when a lot can go wrong with a Sprinkler System.   Sprinkler Pipes can freeze and break.  Sprinkler heads can crack or bust.  Above Ground Back-Flow Valves can crack or leak even during a warm winter.  Oklahoma Drainage and Sprinkler Repair can help.  Give us a call at :

Sprinkler Controller Trouble Shooting

Having Installed Several Thousand Sprinkler Systems over the past several years, here are the most common mistakes made by homeowners who are not comfortable with their Sprinkler Controller.

Most Sprinkler Controllers have a knob or a digital touch screen.  Either way, the basic functions are the same.

1.  Sometimes some brands of Sprinkler Controllers won’t work because the ” Time and Date,” have not been set correctly.  If you select time/date and the screen is blank with no time or date then you have a problem.

*******************************************************************************************************************************

2.  The most common reason that a Sprinkler Controller won’t work is because the breaker has been tripped for the electrical plug that the controller is plugged into.  People assume that because the LED screen on the controller has power that the controller is receiving power.  THIS IS NOT THE CASE!!!!!!!!!!!!!!!!  ALL CONTROLLERS HAVE BACKUP BATTERIES IN THEM TO MAINTAIN THE CONTROLLERS PROGRAMMING IF YOUR ELECTRICITY GOES OFF.  THE BREAKER CAN BE TRIPPED TO THE ELECTRICAL OUTLET AND THE DIGITAL DISPLAY WILL STILL RUN OFF THE BATTERY MAKING IT LOOK LIKE IT HAS POWER WHEN IT DOES NOT.

TEST YOUR OUTLET BY CHECKING YOUR BREAKERS OR PLUGGING SOMETHING INTO THE SOCKET SUCH AS A LIGHT OR A POWER TOOL.

********************************************************************************************************************************

Another very common mistake is that people confuse “Start Times,” with “Run Times” on the controller.

A Run Time is how long you program each Sprinkler Zone to run.

(Zone 1  5 minutes, Zone 2 8 minutes, Zone 3 25 minutes and so on.)  You program how long you want each Sprinkler Zone to run.

A Start Time is a time that you set on the controller to start zone one running.  All other zones automatically follow zone one in order lowest to highest.  Zone 2 knows to always follow zone 1 when it is done.  Zone 3 knows to follow Zone 2 and so on.  Let me repeat this.  Start Times are only for zone 1.  Again, a “Start Time,” is a time that you would like your Sprinkler System to come and run through all the zones.

Sprinkler Controllers have the ability to run more than one start time.  This is to allow your entire Sprinkler System to run more than once in a 24 hour period.  You can have a Start Time of 1 PM.  Zone 1 comes on and runs until its programmed time elapses.  Zone 2 automatically comes on next and runs.  Then zone 3 and so on.  You might have a 2nd Start Time several hours later to start and run your entire system again.  (2nd start time at 8 PM)  The Sprinkler System has had plenty of time to run through all the zones when it started at 1 PM.  At 8 PM the controller turns zone 1 on again and all the zones run their programmed amount of time.  THE MISTAKE PEOPLE MAKE IS THINKING THAT YOU MUST PROGRAM A START TIME FOR EACH ZONE. ( YOU CAN NOT PROGRAM A START TIME FOR ZONE 2,3,4 etc.)  This is also apparent by the fact that most Sprinkler Controllers have a limit of 4 start times but can run more zones than 4.  Most Sprinkler Controllers can run 10 zones or more.

What causes a big problem is a when person programs a Start Time at 1Pm.  Thinking incorrectly that they need to program a Start Time for zone 2.  They enter a second Start Time for 1:15pm, and a third start time for zone 3 at 1:30 PM.  So here is what happens.  Say each zone is programmed to run for 10 minutes each.(Run Time)  Zone 1 comes on and runs at 1 PM.  At 1:10 PM Zone 1 stops and zone 2 comes on.  At 1:15 PM the second start time kicks in and tries to turn on zone 1 again while zone 2 has only been running for five minutes and the other subsequent zones have not run at all.  This is called an “Overlapping Start Time.”  With an Overlapping Start Time, Different brands of controllers do different things.  They are all bad regardless.  Some will run zone one over and over and over causing a flood.  Others will not run at all.

Most people only use or need one Start Time.

********************************************************************************************************************************

The “Water Budget Feature,” found on most controllers can cause problems with your Sprinkler Run Times.  Water Budget is a quick way to quickly change all your Run Times for all your zones at once.  Example  —  Out of the box, your new Sprinkler Controller will be set to 100%.  If you program zone 1 to run 10 minutes and zone 2 to run 15 minutes then if your water budget is 100% then that is exactly what they will run.  If you change your water budget from 100% to 200% now zone 1 will run 20 minutes and zone 2 will run 30 minutes and any other zone’s run time will run double of what it was programmed at 100%.  This is a great feature until you accidentally change your water budget to 900% and don’t realize it.  (or 5%)

IF YOUR RUN TIMES ARE RUNNING MORE OR LESS THAN WHAT YOU PROGRAMMED THEM FOR THEN CHECK THE WATER BUDGET.

********************************************************************************************************************************

Some of the older digital Sprinkler Controllers have an “Enter” button.  Any programming you do must be followed by hitting the Enter Button.  If you don’t hit it then programming that you think you keyed in is lost.  This is why the newer controllers don’t have an Enter Button.

 

Oklahoma Drainage and Sprinkler Repair has been solving all types of Sprinkler System Problems since 1993.

We provide:

1.  Sprinkler Valve Problems

2.  Sprinkler Wiring Problems

3.  Sprinkler Controller Problems / Sprinkler Clock Problems

4.  Sprinkler Head Problems

5.  Sprinkler Pipe Problems

6.  Sprinkler Coverage Problems

7.  Sprinkler Redesign Problems for new fences or swimming pools.

 

Many times sprinkler repair needs arise at inconvenient times. Water lines can break in the middle of the night.  Back-Flow Valves Freeze and break at night too.  Sometimes things go wrong when we are away from our homes as well.  Sprinkler Systems coming on at the scheduled times but not shutting off is common and has several possible causes.  Sprinkler Valves can “stick” open while running from lack of water pressure, or is not getting enough electrical current to shut it off from the sprinkler controller, or even a small piece of debris is stuck in the sprinkler valve and won’t allow the sprinkler valve to close.

Harsh weather in Oklahoma seems to becoming more common.  In 2013,  Norman Oklahoma had 4 inches of rain in two hours.  That’s the most rain in a short time that I can remember.  Storm-Water runoff can cause damage to all types of property and buildings.  Water getting inside your house is never a good thing.  A Drainage System that utilizes a French Drain can help.

Drains can protect your home and property from water damage.  We install a wide variety of Drains in many different places.  A Drain or Group of Drains with Drain Pipe going to an exit point is a “Drainage System.”

Large 6 Inch French Drain Installed in Norman
Large 6 Inch French Drain Installed in Norman

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.

Surface Drain Installed next to sidewalk in Oklahoma City.
Surface Drain Installed next to sidewalk in Oklahoma City.

2.  Keep water away from small or in closed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A Surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the Drain Pipe that is connected to the Drain.

Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows down hill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drain Pipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains

3 inch, 4 inch, and 6 inch Drain Pipes

3 inch, 4 inch, and 6 inch French Drains

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

Drainage Trench from French Drain in Backyard to Street in Norman

Drainage Trench from French Drain in Backyard to Street in Norman

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

The Drainage Pop-Up Emitter is connected to the end of a Drain Pipe.  It is downhill from a French Drain or a Surface Drain.  It is a small release basin with a green pop-up lid.  When releasing water, it pops up about an inch to release the water from the French Drain or Surface Drain.  When the Storm Water has moved through the Drainage System and out of the Pop-Up Emitter, the green lid closes back to its original closed position.  The emitter is designed to release water out into a yard or down a hill or other desirable Drainage Exit Point where there is no curb.

Popup Emitter to release water from a Drainage System in Yukon.
Popup Emitter to release water from a Drainage System in Yukon.

Drainage System installation and design is a big part of our business.  Does your sidewalk turn into a moat after a hard rain?  Does part of your yard look like a pond after a thunderstorm?  Worst of all, are you experiencing concrete deterioration to your foundation, sidewalk, or driveway

Comments
  1. […] heads and sprinkler pipes to fit the new dimensions of your yard. We can redesign or add-on to sprinkler systems where the home owners needs […]

Thank you for your comments.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.