Servicing Central Oklahoma including: Oklahoma City, Norman, Edmond, Midwest City, Del City, Yukon, Mustang, Moore, Norman, Purcell, Newcastle, Blanchard and surrounding areas. For an additional charge we will travel outside Central Oklahoma. CMG has installed Sprinkler Systemsand Drainage Systemsas far away as Ardmore, Altus, or Tulsa.
405-226-0629 E-mail — email@example.com
SPRINKLER SYSTEM INSTALLATION – Wow its been 18 years since we started installing Sprinkler Systems in Central Oklahoma. Many customers have become repeat customers and some have even become good friends. Since 1993, we have tried to provide the best product and service possible. We use top quality parts made by Rain Bird or Hunter unless an alternate brand is desired. Sprinkler Systems installed by CMG are self draining and require very little adjustment or maintenance other than to turn off the Sprinkler System when it is raining or too cold. We also install Rain/Freeze Sensors which do exactly that! The Rain/Freeze Sensor once installed turns off your Sprinkler System when it gets too cold or starts raining and nobody is around to turn off the Sprinkler System. The Rain/Freeze Sensor will turn the Sprinkler System back on again when it warms up or dries out.
SPRINKLER SYSTEM REPAIR – Sprinkler System Repair is an important part of our business. Every Sprinkler System needs maintenance and adjustment just like our homes and cars. CMG Sprinklers and Drains services: Broken Sprinkler Heads, Leaking Sprinkler valves, Broken Sprinkler Pipes, and Defective Sprinkler Controllers just to name a few.
- CMG can fix Broken Sprinkler Heads
- This year CMG has addressed many standing water problems and drainage issues for residents and business owners of Oklahoma. On one occasion, we installed a Surface Drain in the middle of a driveway. After a rain, water was standing in front of the garage and would flow under the door when it got too deep. We cut the driveway, Installed the Surface Drain, and replaced the cement. Problem Solved.CMG can run Drain Pipe to tough to get places. We use a bore machine to run Drain Pipe under driveways for example. Drainage Systems can be installed with minimal damage to driveways and sidewalks.
In 2013 CMG Sprinkler and Drain installed over 200 Drainage Systems in Central Oklahoma. We utilized French Drains, Surface Drains, Channel Drains, and Sump Pumps to solve a wide variety of Drainage Problems. Many Drainage Systems required more than one type of drain. French Drains and Surface drains together were the most common combination.
Drainage Systems have been a big part of our business for the last 20 years. Those years have provided us with the necessary expertise to provide solutions for a wide variety of Drainage Problems. Storm Water Run-Off causes damage to Foundations, Sidewalks, Driveways, Trees, Plants and Grass. A Drainage System Installed by CMG Sprinklers and Drains can help protect your valuable property.
Harsh weather in Oklahoma seems to becoming more common. In 2013, Norman Oklahoma had 4 inches of rain in two hours. That’s the most rain in a short time that I can remember. Storm-Water runoff can cause damage to all types of property and buildings. Water getting inside your house is never a good thing. A Drainage System that utilizes a French Drain can help.
Drains can protect your home and property from water damage. CMG installs a wide variety of Drains in many different places. A Drain or Group of Drains with Drain Pipe going to an exit point is a “Drainage System.”
Drainage Systems can be made up of one drain or a combination of many drains. Drainage problems can be very complex. Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together. Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.
An example of a complex drainage system would be: A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.
An “Exit Point” is the term used for where all the water leaves the Drainage System. Determining the Exit Point is very critical. It is one of the first things we do when diagnosing a Drainage Problem.
Drainage Systems can:
1. Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation. Many times less experienced companies install Surface Drains to keep water away from foundations. This can be a big mistake. A Surface Drain can’t move or drain Sub-Surface Water. Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain. A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water. Surface Drains look better than French Drains. If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain. Just know what you are getting into and what your expectations should be. One side of a foundation alone, can be over 100 feet. A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.
2. Keep water away from small or inclosed areas. This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway. These types of Drainage Problems are best served with Surface Drains. A Surface Drain can move water away from a low area that is relatively small. This can occur in yards, flowerbeds, sidewalks and driveways. A Surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point. Surface Drains are available in many sizes. How quickly they remove standing water is usually determined by the size of the Drain Pipe that is connected to the Drain.
Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it. The water that is in the problem area, can be causing damage or may be inconvenient or both. (Usually Both) A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.
Recently we installed a large 6 inch French Drain in a home in North West Edmond. The home owner was getting water in their floor Duct Work every time it rained. Installing a large French Drain along the wall in their flower bed solved the problem. No longer is water seeping into their foundation and coming up in their vents.
Drainage Systems – For many of us, our homes or businesses are our largest investment. If you have trouble with standing water after a heavy rain, if your yard turns into a pond after a thunder-storm, or if your driveway or sidewalk turn into a moat after a hard rain, give CMG a call. We utilize many types of drains to solve many types of Drainage Problems. CMG installs, French Drains, Surface Drains, Channel Drains, Basement Drains, Trench Drains, Basin Drains, and Sump Pumps.CMG also recommends The, “Perfectbore Company,” for all your Directional Drilling needs. If you need PVC Pipe or Electrical Conduit installed in tough, hard-to-get places, In all of Central Oklahoma. Perfect Bore installs: Drain pipe, PVC Pipe or Conduit under sidewalks, driveways, roads, parking lots. If you need Precision Directional Boring just click on any of the Highlighted Links in this paragraph. You can also check out the Directional Drilling Button at the top of this page.
Give us a call — 405-226-0629 firstname.lastname@example.org